Plankton Pumps for 6000 m depth

plankton_pump_6000_1.jpg

General:
KC plankton pump for vertical pull; the pump itself is constructed of AISI 316 stainless steel, and has a capacity of 20000 L per hour, the plankton pump is used to pump various size of plankton for collecting and taking samples. As a standard, model 23.590 Plankton pump comes with a 60 µm mesh size (Micro plankton), this however can be changed upon request. A new net bag and a collecting bottle can be bought later on.

The system is equipped with a quick change system for the collecting bottles, which enables the user to run many samples without much delay.

Decription:
• For 6000 m.
• Made of AISI 316 stainless steel.
• Power supply: 24 VDC.
• Height: 1470 mm.
• Diameter: Net bag: Ø180 mm, length 490 mm.
• Inclusive net bag, mesh size 60 µm.
• Weight, exclusive the battery cylinder: 21 kg.
• Exclusive the battery cylinder, etc.

The pump can be operated in 2 ways:


• Programmable sampling: The water sampling can be programmed for various time and intervals, max. 99 times. Requires the time lapsed trigger 60.010 etc., and it is programmable for any value between 60 seconds and 1045 hours. Individually settings can be set for each sample. Triggering by pressure can be offered upon request. (Pressure transmitter is not included, please ask KC-Denmark A/S for more information).


• Non-programmable sampling: When the pump is outside the bulwarks, ready for deployment, simply connect the power supply and the pump will start. The pump must be covered by water within short time (the pump must not be operated without water for more than 60 secs.). In this way you will pump all the way down to the desired depth; i.e. you will get samples from the entire water column.

Below please find more details about what is needed for a complete system.

Programmable sampling:
23.590 - Plankton pump
100.217 - Battery cylinder
100.235 - Battery charger
60.010 - Time lapsed trigger (USB or RS-485)
100.230 - Cable
100.234 - Plug for switching on the timer

Non-programmable sampling:
23.590 - Plankton pump
100.217 - Battery cylinder
100.235 - Battery charger
100.230 - Cable from battery box to motor

100.234 Starter Plug.
The starter plug is used for starting the system after it has been preprogrammed for sampling, a delay can be implanted in the program so that the pump first starts pumping after a set amount of time, another option is a trigger system done by pressure transmitter. (Pressure transmitter is not included, please ask KC-Denmark A/S for more information).

100.230 Cable from battery box to motor.
The motor cable is connecting the motor system on the pump with the battery box, using Subconn connectors.

100.235 Battery charger.
The battery charger has an input of 100 - 240 VAC, and is fitted with a Subconn connector to fit the battery box.

100.217 Battery Cylinder
The 100.217 battery cylinder (24 VDC) with capacatity of 10 Amp/h is made of AISI 316 stainless steel. The battery box is pressure tested for 6000 m, and have room for the 60.010 time lapsed trigger circuit board. Tthe battery cylinder is delivered with the needed SubConn connectors (bulk heads) for a fully usable pump. Dimensions for the cylinder: length 500 mm, diameter 121/87 mm (excluding cables and battery charger). More infromation see: Pressure stable battery cylinder

Customized solutions:
The 23.590 plankton pump, also have the ability to be customized to different types of CTD, that is required during sampling, to the right is a photo showing one of those option, please keep in mind KC-Denmark A/S will need all the relevant information for size/height/weight for any CTD that is to be build on to the pump. For more questions or enquires about other customized solutions please contact us.

 

 

Packaging details:
1 pallet w/wooden box, L x W x H: 158 x 50 x 50 cm, gross weight 90 kg.


Source: KC Denmark A/S
Print