New products
Autonomus Benthis Lander
Pressure stable battery cylinder
Current Meter Measurement
Dredges
Mini micro profilers
Plankton Nets
Plankton Pumps
Rosette and Racks
Sediment Samplers
Sediment Trap Station
Small Multi Water Sampler
Vacuum Filtration Station
Water Sampler
Wheels and displays
Other Products
Museum Equipment
Manual
Offers
In-situ photos

KC deck winch - 3 Kwatt

General:
All parts of the winch are laser cut and made of AISI 316 stainless steel. The drum is activated by a 3 Kwatt worm gear motor,
3 x 400 Volt AC, 50 Hz.

The spindle has a rotation speed of 170 revolutions per minute, which app. corresponds to a cable speed of 190 meters per minute.

Capacity:
The spindle from the gear has a torque of 200 Nm, which corresponds to a tractive force of app. 100 kp.
The capacity of the drum is app. 1200 meter Ø3 mm cable.

Slip-ring device:
For transferring data and/or power a slip ring device (2-8 poles) can be mounted. Please refer to the slip-ring section.

Motor:
El-motor: 3 Kwatt ABB motor, 3 x 400 Volt AC, + ground, /10 A, 50 Hz, 1400 revolutions per minute, double insulated and with a shield for protection against splash. If the motor effect is reduced to 2 Kwatt, 1 x 230 Volt AC, 50 Hz can be used.


Gear:
Worm gear: Mvf 86/A 1:10 P= 24 daNm. The spindle has a rotation speed of 170 revolutions per minute, which app. corresponds to a cable speed of 190 meters per minute.



The wire is provided by hand. The distribution is controlled by 4 easy-running rollers produced in AISI 316 stainless steel.

Frequency regulator:
The frequency regulator (type Lence) is mounted inside the electrical table for IP66. A main choke 3 x 400 Volt AC, 3 x 12 Amp / 1.6 mH is mounted in the bottom of the table.

Ball bearings:
AISI 304 stainless steel flange ballbearings Ø35 mm type FAFYJ. (To be greased every month)

Weight:
Gross weight: App. 140 kg.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Description Ordering no.
Winch, made of AISI 316 stainless steel,
3 Kwatt worm gear motor,
3 x 400 Volt AC, 50 Hz.
40.100
Accessories:
Mounting of AISI 316 stainless steel clamp unit for slip-ring device, exclusive the slip-ring device. Please refer to the slip-ring section. 40.100 A
Slip-ring device, 2 poles 30.390
Slip-ring device, 4 poles 30.400
Slip-ring device, 6 poles 30.600
Slip-ring device, 8 poles 30.800