KC deck winch - 3 Kwatt

General:
All parts of the winch are laser cut and made of AISI 316 stainless steel. The drum is activated by a 3 Kwatt worm gear motor,
3 x 400 Volt AC, 50 Hz.

The spindle has a rotation speed of 170 revolutions per minute, which app. corresponds to a cable speed of 190 meters per minute.

Capacity:
The spindle from the gear has a torque of 200 Nm, which corresponds to a tractive force of app. 100 kp.
The capacity of the drum is app. 1200 meter Ø3 mm cable.

Slip-ring device:
For transferring data and/or power a slip ring device (2-8 poles) can be mounted. Please refer to the slip-ring section.

Motor:
El-motor: 3 Kwatt ABB motor, 3 x 400 Volt AC, + ground, /10 A, 50 Hz, 1400 revolutions per minute, double insulated and with a shield for protection against splash. If the motor effect is reduced to 2 Kwatt, 1 x 230 Volt AC, 50 Hz can be used.


Gear:
Worm gear: Mvf 86/A 1:10 P= 24 daNm. The spindle has a rotation speed of 170 revolutions per minute, which app. corresponds to a cable speed of 190 meters per minute.



The wire is provided by hand. The distribution is controlled by 4 easy-running rollers produced in AISI 316 stainless steel.

Frequency regulator:
The frequency regulator (type Lence) is mounted inside the electrical table for IP66. A main choke 3 x 400 Volt AC, 3 x 12 Amp / 1.6 mH is mounted in the bottom of the table.

Ball bearings:
AISI 304 stainless steel flange ballbearings Ø35 mm type FAFYJ. (To be greased every month)

Weight:
Gross weight: App. 140 kg.
Description Ordering no.
Winch, made of AISI 316 stainless steel,
3 Kwatt worm gear motor,
3 x 400 Volt AC, 50 Hz.
40.100
Accessories:
Mounting of AISI 316 stainless steel clamp unit for slip-ring device, exclusive the slip-ring device. Please refer to the slip-ring section. 40.100 A
Slip-ring device, 2 poles 30.390
Slip-ring device, 4 poles 30.400
Slip-ring device, 6 poles 30.600
Slip-ring device, 8 poles 30.800

Source: KC Denmark A/S