1.5 KWatt Winch 1 x 230 V AC

winch_30060_stor.jpg

Application:
Winch, portable, for small boats and research vessels. Suitable for max. 100 kg load. Shown with meter- and speed counter. (Optional)

Capacity:
1500 m of Ø2 mm wire or 600 m of Ø3 mm wire.

Power supply:
230 VAC/1500 Watts. 12 or 24 VDC via an inverter (optional)

Speed:
Fully variable by a joy stick.

General:
The winch is manufactured from AISI 316 stainless steel.

Finish: Electro polish. The photos show a painted version.

Manoeuvre box:
Splash proof aluminium housing. Standard delivery comes without the floor stand (optional).

Counter:
The winch can be equipped with a counter for deployed length and/or speed. Also available with interface for RS-232, RS-485 or USB, please see our counter section.

Slip ring device:
A built-in slip-ring device (2-8 poles) can be mounted. Requires mounting of the AISI 316 stainless steel clamp unit 30.001.

Please refer to the slip-ring section.
Disc brake:
An adjustable disc brake will ensure swift and safe handling of the load.
Disc brake, detail:
Detail of the heavy duty disc brake.

At the top of the drum you can see a removeable lid for easy mounting of cable or wire.

Crank handle device:
The detachable handle is intended for emergency use if any failure for the power supply. A small bracket is removed and the handle is fixed to an integrated gear box.

The device must be ordered with the winch as a subsequent mounting is not possible.

Fastening:
Standard delivery comes with 1 pc Ø40 x 900 mm AISI 316 stainless steel shaft to be mounted in the solid fitting at the bottom. Special mounts and fittings for the rail or bulwark are made on request.

Bracket for rail or bulwark:
The adjustable bracket, manufactured from AISI 316 stainless steel can be positioned in several ways. Standard delivery comes without the Ø40 mm shaft.

General: Ordering no.
Portable winch, 1500 W. Manufactured from AISI 316 stainless steel. Standard wheel without electronic sensors. 30.060
Portable winch, 1500 W. Manufactured from AISI 316 stainless steel. Standard wheel inclusive electronic sensors for meter/speed counter. 30.061
Electrical
Power supply: 230 VAC/1500 Watts.
12 or 24 VDC via an inverter. (Optional)
Emergency brakes: 2 pcs. located at the winch + the manoeuvre box.
Mechanical:
Material: AISI 316 stainless steel
Drum: Inner diameter: 200 mm
Outer diameter: 320mm
Width: 210 mm.
Drum speed: 56 rev/min
Drum capacity: 1500 m of 2 mm wire or 600 m of 3 mm wire.
Wire speed: 32 m/min. (Approx.)
Angle worm gear, self locking Bonfiglioli type W75, ratio 25:1
Brake system: Disc brake made of AISI 316 stainless steel,
Mounting for rail or bulwark Shaft, Ø40 x 900 mm, AISI 316 stainless steel
Weight, standard, 117 kg exclusive wire.

Source: KC Denmark A/S