3.0 KWatt Winch 3 x 400 V AC

winch_32720_stor.jpg

Electrical winch

Power:
3 kW/4 HP

Power supply:
3 x 400 VAC/50 Hz,

The front is covered by a transparent protection shield (Polycarbonate, 6 mm).

Wire guide system

Mechanical wire guide

Frequency converter:

The speed of the winch is fully variable due to the frequency converter.

Counter for length of wire

Frequency converter:

The speed of the winch is fully variable due to the frequency converter.

General: SPECIFICATIONS TO BE UPDATED
CTD Winch, 3 kW, with adjustable speed. All materials:
AISI 316 stainless steel
Electrical
Power supply: 3 x 400 VAC, 50 Hz
Optional:
3 x 500 VAC/60 Hz
Speed regulation: Fully variable by a joy stick. Regulated by a frequency converter, ABB
Manoeuvre box: AISI 316 stainless steel, 3 mm and ABS plastic.
Enclosure rating: IP 65
Control box: AISI 316 stainless steel, 2 mm
Enclosure rating: IP 65
Emergency brakes: 3 pcs. Located at each end of winch + the manoeuvre box.
Motor
Main motor Bonfiglioli 3 kW, with electro magnetic brake. 3 x 400 VAC/50 Hz. Rev.: 1440/min
Mechanical:
Material AISI 316 stainless steel
Main rack: Square tube, AISI 316 stainless steel
Side plates: AISI 316 stainless steel, 8 mm. Reinforced by adding tubes of
60 x 40 x 3 mm (AISI 304).
Drum and disc brake: AISI 316 stainless steel, 8 mm.
Finish Electro polish.
Drum: Outer diameter: mm
Inner diameter: mm (standard delivery).
Drum rev: 0 - 43 rev./min. Adjustable.
Drum capacity:
Wire speed: Approx. 1,0 m/sec.
Angle gearbox Bonfiglioli type
Tractive force: Inner layer:
Brake system: 1. Disc brake made of AISI 316 stainless steel, 8 mm
2. Automatic motor brake
Ball bearings AISI 304 stainless steel flange ball bearings, 3 pcs ΓΈ30 mm.
Protection shield: Transparent polycarbonate, 6 mm
Weight, standard, without wire 300 kg
Dimensions, overall: L x W x H: 118 x 102 x 115 cm

Source: KC Denmark A/S