New products
Autonomus Benthic Lander
Pressure stable battery cylinder
Current Meter Measurement
Mini micro profilers
Plankton Nets
Plankton Pumps
Rosette and Racks
Sediment Samplers
Sediment Trap Station
Small Multi Water Sampler
Vacuum Filtration Station
Water Sampler
Wheels and displays
Other Products
Museum Equipment
Micro Plastic Particle Pump
In-situ photos

7.5 KWatt Winch 3 x 400 V AC



Electrical winch

7,5 kW/10 HP

Power supply:
3 x 400 VAC/50 Hz,
Optional 3 x 500 VAC/60 Hz.

The front is covered by a transparent protection shield (Polycarbonate, 6 mm)

Electrical winch

Frequency converter:

The speed of the winch is fully variable due to the frequency converter.

Frequency converter:
A: Hand brake
B: Slip ring device (optional)
C: Emergency stop. 1 pc at each end
D: 4 brackets for lifting the winch
E: Automatic wire guide
F: Ball bearing for spindle
G: Reinforced edge
H: Solid fastenings brackets (4 pcs).
I: 4 Guiding rolls for wire
J: Drum

Wire guide system

Mechanical wire guide system

Wire guide system
CTD Winch, 7,5 kW, with adjustable speed. All materials:
AISI 316 stainless steel.
Power supply: 3 x 400 VAC, 50 Hz
3 x 500 VAC/60 Hz
Speed regulation: Fully variable by a joy stick. Regulated by a frequency converter, ABB, 7,5 kW.
Manoeuvre box: AISI 316 stainless steel, 3 mm and ABS plastic.
Enclosure rating: IP 65
Control box: AISI 316 stainless steel, 2 mm.
Enclosure rating: IP 65
Emergency brakes: 3 pcs. Located at each end of winch + the manoeuvre box.
Main motor: Bonfiglioli 7,5 kW, with electro magnetic brake. 3 x 400 VAC/50 Hz. Rev.: 1440/min
Material: AISI 316 stainless steel
Main rack: Square tube, 100 x 100 x 4 mm.
AISI 316 stainless steel
Side plates: AISI 316 stainless steel, 8 mm. Reinforced by adding tubes of 60 x 40 x 3 mm. (AISI 304).
Drum and disc brake: AISI 316 stainless steel, 8 mm.
Finish: The drum and the disc brake: Electro polish.
Main rack: Painting RAL 5010
Drum: Outer diameter: 740 mm
Inner diameter: 460 mm (standard delivery).
Drum rev: 0 - 43 rev./min. Adjustable.
Drum capacity:
Wire speed: Approx. 1,0 m/sec.
Angle gearbox: Bonfiglioli type A503. Ratio 18:1
Tractive force: Inner layer:
460 mm (Empty drum): 1500 Nm
Brake system: 1. Disc brake made of AISI 316 stainless steel, 8 mm
2. Automatic motor brake
Ball bearings: AISI 304 stainless steel flange ball bearings, 3 pcs ø30 mm.
Protection shield: Transparent polycarbonate, 6 mm
Weight, standard, without wire: 600 kg
Dimensions, overall: L x W x H: 180 x 113 x 160 cm