New products
Autonomus Benthis Lander
Pressure stable battery cylinder
Current Meter Measurement
Dredges
Mini micro profilers
Plankton Nets
Plankton Pumps
Rosette and Racks
Sediment Samplers
Sediment Trap Station
Small Multi Water Sampler
Vacuum Filtration Station
Water Sampler
Wheels and displays
Other Products
Museum Equipment
Manual
Offers
In-situ photos

25 KW Hydraulic winch

Application:
Heavy duty winch, capacity 350 kg at 130 bar, max. load 700 kg at 260 bar

General:
The winch side is made of 10 mm AISI 316 stainless steel plate and electro-polished. The winch is mounted on an AISI 316 stainless steel frame of rectangular tube with dimensions: 100 x 50 x 5 mm. 4 welded pieces mounted on the frame for fastening to the ships deck.

Capacity:
1200 metres Ø6 mm wire, rope or conducting cable and in front of the winch is an automatic cable guide system.

The drum:
The drum is made of 6 mm AISI 316 stainless steel plate and electro-polished.
The outer diameter of the drum is Ø500 mm and the internal diameter is Ø300 mm. A safety disc brake system is mounted at the side of the drum.

Motor and speed regulation:
At one side is mounted a 25 KWatt POCLAIN MS 05 - 560cm³ hydraulic motor with 10 cylinders and one automatic brake. A Danfoss electric proportional valve and a Danfoss joystick regulate the speed.

Control panel:
An emergency stop, joystick for speed reg., up/down functions, on/off switch, and indicator lamp are built into an AISI 316 stainless steel manoeuvre box with a polycarbonate shield mounted at the top to protect it from rain and splash.

Slip-ring device:
A slip ring device (2-8 poles) can be mounted at one side of the winch. (Optional). On the outside of the slip ring device a Subconn connector is mounted. Inside the drum a Subconn connector is mounted. Please refer to the slip-ring section.
 
 
Automatic cable guide system
 
 
40.300 - Hydraulic winch
 
 
Control panel with emergency stop, joystick for speed regulation, etc.
 

Technical data for hydraulic winch:

Description Ordering No.
CTD Hydraulic Deck Winch 25 KWatt: 40.300
Electrical:
Supply: 230 Volt AC
Mechanical:
Material: AISI 316 Stainless steel
Drum: O.D. Ø500 mm., I.D. Ø300 mm.
Drum speed: approx. 100 rev./min.
Max. drum speed: approx. 200 rev./min.
Drum capacity: approx. 1200 meter Ø6 mm wire.
Hydraulic:
Hydraulic motor: POCLAIN PH-MS-05 with 10 cylinder and one automatic brake
Oil flow: (56 - 100) litre/min.
Normal load: 350 Kg at 130 Bar
Max. load: 700 Kg at 260 Bar
Speed up to 100 rev. 130 bar: Approx: 2 metres /sek.
Speed up to 200 rev. 260 bar: Approx: 4 metres /sek.
Weight:
Weight of winch excl. wire: Approx. 350 kg.