Mini-Bat Winch

small winch 1

Application:
The winch can be used on small research vessels and it is suitable for Kajak sediment sampler, small Van Veen and Ekman grabs, water samplers and other smaller equipment.

General:
The winch is made of AISI 316 stainless steel profile and finish is electropolishing. The built-in disc brake will ensure a swift and safe handling.

The winch is supplied with a sheave, which ensures that the wire is always leaded correctly.

Capacity:
600 m of Ø2 mm wire, or
400 m of Ø3 mm wire, or
40 m of Ø10 mm soft polyurethane cable.

Operation load:
Max. 25 kg.
Gross weight:
Approx. 20 kg.

Digital Counter:
Each revolution of the counter wheel is equal to 33 cm of wire length. For measuring the length in m, the read-out must be multiplied with 0,1. An example: Read-out of 144 indicates a length of 14,4 m.

The counter does not have a reverse counting function so the count increases regardless of the wire's direction.

Push the small button to reset the counter to 0, the counter has an internal Lithium battery with 7 years battery life.

Slip ring device:
Transferring of data or power can be done via a slip ring device (2-8 conductors) (optional). Please refer to the slip ring section.




30.006 Adjustable bracket:
The 30.006 adjustable bracket fits for the following winches: 30.000, 30.040, 30.050, 30.051, 30.060 and 30.061, if you wish a custom made design on a bracket for another winch, please contact us with your requirements.

The bracket is made of AISI 316 stainless steel, and works as a universal bracket, which is able to fit on most boats due to the flexible design.

30.005 Adjustable bracket:
The 30.005 bracket is made for 30.000 and 30.040 only, if you wish a custom made design on a bracket for another winch, please contact us with your requirements.

Technical Specifications - Winch 30.040
KC portable winch operated by hand SWL: 25 kg (max. 250 Nm, first layer)
Mechanical
Material: All parts are made of AISI 316 stainless steel
Main rack: 35 x 35 x 2 mm profiled tube
Finish: Electropolishing
Drum: Inner diameter: Ø200 mm
Outer diameter: Ø320 mm
Width: 210 mm
Drum and disc brake: 4 mm AISI 316 stainless steel
Mechanical brake: Ø320 mm disc brake
Ball bearing: AISI 316 stainless steel flange ball bearing,
1 pc Ø25 mm.
Shaft required for mounting on bulwark: Ø20 AISI 316 stainless steel
Weight and dimensions
L x W (depth) x H: 58 x 76 x 95 cm
Weight: Approx.: 20 kg

Source: KC Denmark A/S