top graphics line

KC Hot Water Vessel 800 litre
General:
The vessel is made of 2mm stainless steel AISI 316 quality and insulated with 25 mm polystyrene foam.
 
Dimensions: 
L=200 cm, W=50 cm, D=80 cm.

The lid is insulated with the same polystyrene material.

Bulit-in stirring device

Heating Elements:
In the bottom are mounted 3 ceramic heating elements, 3000 watts each. They are controlled by a digital thermostat with one PT 100 sensor and in the corner is a 3/4" draining valve. A stainless steel pump is under the centre of the bottom for stirring in the vessel. Above the three heating elements and the stirring device is a stainless steel protecting net frame. A stainless steel shelf is placed in the middle of the vessel. 
 
Control box:
Outside the vessel is a control box with different on/off switches,  indicator lamps, and a digital thermostat with a large red display showing temperature in the vessel. 
 
Rack:
The vessel is placed on a stainless steel rack with four 5" wheels.
Technical data: Ordering no. 400.030
Dimensions: W/o rack
L x W x D=
200 x 50 x 80 cm
Supply Voltage:
3 x 400 Volt AC, 50 Hz,
P = 9000 Watts
Magnetic stirring device. 220 Volt AC, 50 Hz, Electronic relay-system. (Transistorized)
Q 400 litre/minute

Last rev. of this page: November 22, 2004