KC-Portable Sandblasting Machine
	Application: All kinds of restoration of metal and steel pieces, monumental rocks and church restoration. The machine can be used with glass powder, aluminium oxide (corundum), granulated nutshells and similar. The powder container can hold app. 6 litre of glass powder or similar. General: The portable sandblasting machine is built of 5 mm impact strengthened plastic plates.  An air regulator with a water filter, a manometer and a 24 Volt AC solenoid valve are mounted at the top of the front plate. A switch, an indicator lamp, a 24 Volt transformer and a socket for the foot switch are mounted at the bottom of the front plate. The jet of the blasting pistol has an internal diameter of ø4 mm, and the tubes between pistol and powder container are app. 1,5 meters long. Standard delivery: Does not include air compressor. See technical data for recommended performance.
Dimensions: W x D x H: 20 x 10 x 40 cm   Mode of operation: Air is blown through the pistol, creating a vacuum. The vacuum drives a mixture of air and powder through the tube from the mixing aggregate of the powder container. The flow of powder and the working pressure can be regulated by the air regulator. Technical data   Power supply 230 Volt AC Working voltage on the machine 24 Volt AC Capacity 250 - 400 liters/minute (app. 2 - 4 Hp) Requisite air supply: Max. 10 bar air pressure     Description Ordering no. Complete portable sandblasting machine includes: 1 pc plastic powder container. 1 pc blasting pistol with ø4 mm jet. 1 pc  foot switch. 5 meters of 220 Volt supply cable (3 x 0,75 mm²) 5 meters of ø8 mm reinforced air tube. Standard delivery does not include the air compressor. 400.415     Spare parts   ø4 mm steel jet for sandblaster 400.080 Foot switch with cable (2 meters) 400.110