KC Flux Chamber
100.200 - Flux chamber Transparent or black	Flux chamber. The flux chamber is made of a 3 mm acrylic plate PMMA or black PVC and has a stirring device mounted on a lid of 10 mm thickness.  Dimensions of the chamber:  Sides (width x breadth): 300 x 300 mm.  Height: 480 mm exclusive motor housing. Colour: Transparent or black Power Supply: 12 or 24 Volt DC (Optional)
There is a ø250 mm hole for the stirring device on top of the chamber.  A ø6 mm silicone sealing ring is milled down into the lid to seal the hole. On top of the lid a smaller removeable acrylic lid is placed. This lid holds the motor housing. The stirring device is driven by a 12 Volt or a 24 Volt DC MINIMOTOR planetary gearhead motor with a fixed speed of rotation. 12 pcs. of ø10 x 4 mm Neodyne magnets takes care of the power transmission from motor to the stirring device.  Water samples are taken through 2 ø8 mm PVC hoses with a syringe fitting mounted on the end of each hose. The hoses are connected with the inside of the chamber through 2 ø6 mm holes placed near the top on the side of the chamber. Ordering No 100.200
Photo-Gallery: Power Supply, 0 - 30 Volt DC Black or transparent flux chamber Motor housing - 12 or 24 Volt DC 24 pcs of ø10 x 4 mm Neodyne magnets transfers the rotation to the stirring device