KC Electric Shock Fishing System (Model to carry on back)
Ordering No. 200.311	Short description of KC Electric Shock Fishing System The rectifier box is made of shock-proof plastic and has built-in electronics. At the front is mounted a 220 Volt DC positive (+) tap and a negative (÷) tap, main switch, emergency stop and various indicator lamps and a 24 Volt DC volt meter. A dead mans relay system is built-in and a 10 K ohm resistance for automatic discharging the 450 Volt DC/680 micro-farad capacitor and also a 45° tilt switch if the operator falls over. The rectifier box is mounted at the top of a Norwegen Military backpack rack with upholstery on back and hip belt and below the rectifier box is mounted a 24 Volt DC 12 amp/h battery box made of plastic and with a quick change arrangement made of AISI 316 stainless steel and a special 24 Volt DC CCE plug. Complete unit incl. Battery Box. Weight 15 Kg Ordering No. 200.311
200.321   24 Volt DC charger for gel  battery with a special 24 Volt DC  CCE Plug.	200.320 Extra Battery Box with 24 Volt DC 12 amp/h and a special 24 Volt DC CCE plug.Weight 8.5 Kg
Using the system in Denmark requires an official safe test for each operator. Users abroad must follow local regulations. KC-Denmark IS NOT RESPONSIBLE FOR OPERATORS WHO IGNORE LOCAL REGULATIONS.
200.310 - Negative electrode for carry on back system Electrode made from ø22 mm copper-tupe with a length of 300 mm and with 2 meter 3 x 0,75 mm² soft Neoprene cord with a special CEE plug.	200.309 - Positive (+) electrode for carry on back system + Ring Electrode with built-in dead mans contact is made from ø5 mm hard copper, with a diameter of  ø250 mm and a 1.1 meter long ø28 mm reinforced fibre glass shaft with 2 meter 3 x 0,75 mm² soft Neoprene cord with a special CEE plug.
Click to see accessories for Electric Shock Fishing.
On Location Photo Gallery Testing of equipment: Biologist Peter Kaarup, Århus Amt