KC Denmark - About us - Ordering

Ordering no.	Description

	Integrated, tubular water sampler
10.100	Integrated tubular water sampler, 1 litre
10.200	Integrated tubular water sampler, 2 litre

	Ruttner
11.001	Ruttner water sampler, 0,7 litre, drop messenger 80 gr
11.002	Ruttner water sampler, 1,7 litre, drop messenger 500 gr
11.003	Ruttner water sampler, 3,0 litre, drop messenger 500 gr
11.004	Ruttner water sampler, 5,0 litre, drop messenger 500 gr
	Spare parts
10.001	Drop messenger 500 gr
11.005	Drop messenger 80 gr
11.006	Rubber seal for 1,7/3,0 and 5 litre

	Van Dorn
11.100	Van Dorn horizontal water sampler, 2,0 litre, drop messenger 500 gr. Without direction fin.
11.200	Van Dorn horizontal water sampler, 3,0 litre, drop messenger 500 gr. Without direction fin.
11.300	Van Dorn horizontal water sampler, 5,0 litre, drop messenger 500 gr. Without direction fin.
	Spare parts
10.001	Drop messenger, 500 gr

	Niskin
100.148	250 ml Niskin water sampler rack with 3 pcs of 250 ml water samplers

	Niskin water sampler rack (rosette)
60.000	Niskin water sampler rack (rosette) for 12 pcs of Niskin water samplers. Without water samplers. Can be equipped with standard Niskin bottles or special low cost bottles.
60.050	Niskin water sampler rack for 6 pcs of Niskin water samplers. Without water samplers. Can be equipped with standard Niskin bottles or special low cost bottles.
60.010	Time lapsed trigger for multiple water sampler
n/a	Battery box, 24 Volt/2,5 Amp/h. With room for mounting of time lapsed trigger system
60.002	Center hinger for single ocean water sampler
60.003	M10 bolt with wingnut AISI 316 stainless steel
60.004	Drop messenger for center hinger, 800 gr special. The messenger can be opened, inserted at the line at any point and ready for use.
	Niskin bottles
60.100	1,7 litre PVC Niskin water sampler. PVC. Inclusive drop messenger 400 g (Open/close) and 2 pc M10 mounting clamps for wire.
60.200	2,5 litre PVC Niskin water sampler. PVC. Inclusive drop messenger 400 g (Open/close) and 2 pc M10 mounting clamps for wire.
60.300	5,0 litre PVC Niskin water sampler. PVC. Inclusive drop messenger 400 g (Open/close) and 2 pc M10 mounting clamps for wire.
60.400	7,5 litre PVC Niskin water sampler. PVC. Inclusive drop messenger 400 g (Open/close) and 2 pc M10 mounting clamps for wire.
60.500	10,0 litre PVC Niskin water sampler. PVC. Inclusive drop messenger 400 g (Open/close) and 2 pc M10 mounting clamps for wire.
60.600	12,0 litre PVC Niskin water sampler. PVC. Inclusive drop messenger 400 g (Open/close) and 2 pc M10 mounting clamps for wire.

	Niskin water samplers, low cost, only for rosette rack or with center hinger
61.100	1,7 litre PVC Niskin water sampler. PVC. Exclusive drop messenger and M10 mounting clamps.
61.200	2,5 litre PVC Niskin water sampler. PVC. Exclusive drop messenger and M10 mounting clamps.
61.300	5,0 litre PVC Niskin water sampler. PVC. Exclusive drop messenger and M10 mounting clamps.
61.400	7,5 litre PVC Niskin water sampler. PVC. Exclusive drop messenger and M10 mounting clamps.
61.500	10,0 litre PVC Niskin water sampler. PVC. Exclusive drop messenger and M10 mounting clamps.
61.600	12,0 litre PVC Niskin water sampler. PVC. Exclusive drop messenger and M10 mounting clamps.
	Accessories
60.001	Drop messenger, 400 g. (Open/close) for Niskin and for Niskin in cascade. Not suitable for centrer hinger.
60.002	Center hinger for single Niskin water sampler, inclusive 2 pcs of M10 mounting clamps.
60.003	M10 mounting clamp with wingnut, AISI 316 stainless steel. (Required: 2 pcs).
60.004	Drop messenger, 800 g. (Open/close), for Niskin with center hinger. Warning: Not to be used on a single Niskin sampler as it will cause serious damage to the sampler.

	Special water sampler
11.210	KC small stainless steel water sampler, 500 ml
11.220	70 ml water sampler for oil (can be sterilized)

	Small pumps for deep sea
11.350	Peristaltic pump, 6 channels. Max. 24 Volt DC, recommended 6-14 Volt DC. Pressure compensated for 6000 m depth.
11.400	Centrifugal pump, pressure compensated for 6000 m, Water flow: 10-15 litres/min. Power supply: Max. 24 Volt DC. Recommended 6-18 Volt DC. Max. power consumption: 72 Watt.


	Sediment samplers
	Ekmann grab, 225 and 400 cm²
12.000	Ekman bottom corer, 225 cm², drop messenger 500 gr
12.002	Ekman bottom corer, 400 cm², drop messenger 500 gr
	Spare parts
12.001	Drop messenger, brass, ø3,2 x 9 cm (500 gr)
12.003	Spring for model 12.000 only. Requires 2 pcs.
12.005	weight, 2 kg, for 12.002 only

	Van Veen grabs
12.110	Van Veen bottom grab, 250 cm² with 2 lids
12.210	Van Veen bottom grab, 1000 cm² with 2 lids
12.310	Van Veen bottom grab, 2000 cm² with no lids
12.320	Van Veen bottom grab, 2000 cm² with 2 lids
	Accessories
12.205	Extra weight, 5 kg only for 12.200 and 12.210

	Small volume water sampler
12.220	Small volume water sampler, 70 ml

	Day Grab
12.300	Day grab (Modified Smith and MacIntyre grab)
	Accessories
80.407	5 kg lead weight for Day Grab

	Corer operated by hand (2 x 2 metre long shaft)
13.000	Sediment corer sampler, model A, head of plastic, non-return flap
13.400	Sediment corer sampler, model B, head of steel, full-flow through
13.014	2 metres extension shaft (AISI 304 stainless steel) For model A + B.

	Small corer sampler operated by line or wire

	Kajak corer, quick change complete
13.030	Kajak corer complete, consists of 1 pc 13.030, 1 pc 13.001, 1 pc 13.200 and 6 pcs 13.310
	Accessories
13.001	2" tube thread/sharpened, 50 cm
13.011	2" tube thread/sharpened, 100 cm
13.002	2" tube thread/thread, 50 cm
13.012	2" tube, thread/thread, 100 cm
13.003	Piston rod, adjustable, 65 cm with silicone packing
13.013	Piston rod, adjustable, 115 cm with silicone packing
13.004	Carver
13.005	Rubber bung
13.006	Fraction tray for ejected sample
13.200	Steering lead weight, 2 kg1
13.300 A	Extension shaft, tent pole principle, only for kajak core sampler, stainless tube, 1 tube
13.300 B	Extension shaft, tent pole principle, only for kajak core sampler, stainless tube, 1 tube
13.300 C	Extension shaft, tent pole principle, only for kajak core sampler, stainless tube, 1 tube
13.310	Top lead weight, 650 gr each

	Corer operated by winch
	Small free fall corer
13.570	Small free fall corer complete, consisting of: 1 pc 1000 mm corer, 2 pcs of 7 kg lead weight, 1 pc orange peel closing system, 1 pc carver and 1 pc PVC internal liner
	Accessories
13.003	Piston rod, adjustable, 65 cm with silicone packing
13.013	Piston rod, adjustable, 115 cm with silicone packing
13.015	Piston rod, adjustable, 165 cm with silicone packing
13.017	Piston rod, adjustable, 215 cm with silicone packing
13.421	Stainless steel corer tube, ø60/53 mm x 1000 mm
13.421 A	Stainless steel corer tube, ø60/53 mm x 1500 mm
13.421 B	Stainless steel corer tube, ø60/53 mm x 2000 mm
13.522	Lead weight, 7 kg, 1 pc
13.523	Lead weight, 2 kg, 1 pc
13.524	Orange peel closing system, 1 pc
13.525	Carver, cutting edge, 1 pc
13.426	Internal PVC liner, ø50/46 x 995 mm
13.426 A	Internal PVC liner, ø50/46 x 1495 mm
13.426 B	Internal PVC liner, ø50/46 x 1995 mm
13.427	Internal PMMA acrylic liner, ø50/46 x 995 mm
13.427 A	Internal PMMA acrylic liner, ø50/46 x 1495 mm
13.427 B	Internal PMMA acrylic liner, ø50/46 x 1995 mm
13.527	Steering ring for PVC and PMMA acrylic liners
13.528	Rubber bung for PVC and PMMA acrylic liners

	Gravity corer - can be changed to a piston corer
13.540	Gravity corer for ø101,6 mm corer and ø90 mm PVC liner. Detachable core tubes in segments of 1500 mm. By adding extra components the gravity corer can be changed to work as a piston corer.
	Piston corer
13.600	Piston corer complete, consisting of: 1 pc main rack, 5 pcs 28 kg lead weights, 1 pc piston head with wire, 1 pc complete Kullenberg releaser, included 1 pc 30 kg weight station and 1 pc lock for coring tube.
	Accessories
13.702	Coring tube, AISI 316 stainless steel, 2,2 m
13.704	Coring tube, AISI 316 stainless steel, 4,2 m
13.802	Coring tube, transparent PVC, 2,2 m
13.804	Coring tube, transparent PVC, 4,2 m
13.901	Tube detacher
13.902	Drum with ratchet device and wire
13.903	Piston rod for ejecting the sample
13.904	2 trestles made of mahogany plywood
13.905	Weight, 28 kg

	Haakonson apparatus
13.980	Haakonson apparatus

	Various
	Bottom scraper
14.000	Bottom scraper with cutting edge
	Spare parts
14.001	Sieve, ø200 mm, app. 2000 µ

	Bottom racket
15.001	Bottom racket, 500 mm net, 500 µ

	Surber sampler
15.200	Surber sampler, 650 mm net, 500 µ
15.210	Surber sampler, 650 mm net, 1000µ
	Spare parts
15.205	Net bag, 650 mm, 500 or 1000 µ

	Mini surber sampler
15.300	Mini surber sampler
	Spare parts
15.301	Net bag, 200 µ

	Fishing net
16.000	Fishing net, model A
16.100	Fishing net, model B

	Hand winches - lines - trimble - snap hook
17.000	Small hand winch, ø100 mm, without line
17.001	10 m ø2 mm metric scaled polyester line, only for 700 ml water sampler, model 11.001
17.002	20 m ø2 mm metric scaled polyester line, only for 700 ml water sampler, model 11.001
17.200	Stuff winch, ø300 mm, without line
17.300	Polyester line, ø5 mm, unmarked, each m
17.399	Polyester line, ø5 mm, 10 m, scaled each meter
17.400	Polyester line, ø5 mm, 15 m, scaled each meter
17.401	Polyester line, ø5 mm, 20 m, scaled each meter
17.402	Polyester line, ø5 mm, 25m, scaled each meter
17.403	Polyester line, ø5 mm, 30 m, scaled each meter
17.600	Mounting of stainless steel thimble + snap hook

	Secchi discs
18.000	Secchi disc, ø250 mm
18.001	Secchi disc, ø300 mm

	Rakes
19.000	Plant rake, model A (Sigurd Olsen)
19.100	Plant rake, model B (Luther)
19.150	Plant rake, with 3 x 2 m shaft of reinforced fibre glass
	Spare parts
19.001	Set of 2 pcs teeth for 19.000

	Dredge
19.500	KC Biological dredge, triangular
	Accessories
19.501	Net bag, 500 µ

	KC Biological dredge, rectangular
19.600	KC Biological dredge, rectangular
	Spare parts
19.601	Net bag, 500 µ

	Counting chamber, model A
20.000	Complete counting chamber, consisting of: 1 pc stainless steel base plate and 1 pc of acrylic chamber, 5 - 10 or 25 ml
	Accessories
20.001	Top glass, ø32 mm (10 pcs)
20.002	Acrylic chamber, 5 ml
20.003	Acrylic chamber, 10ml
20.004	Acrylic chamber, 25 ml
20.005	Bottom glass, ø27,5 mm x 0,2 mm (100 pcs)
20.006	Base plate in AISI 316 stainless steel

	Counting chamber, model B
21.000	Counting chamber, complete, consisting of 1 pc acrylic base plate, 1 pc thread ring, 1 pc ring detacher and 1 pc holder for acrylic base plate
	Accessories
21.001	Acrylic chamber, 10 ml
21.002	Acrylic chamber, 25 ml
21.003	Acrylic chamber, 50 ml
21.004	Acrylic chamber, 100 ml
21.006	Acrylic base plate
21.007	Thread ring, AISI 316 stainless steel
21.008	Ring detacher
21.009	Holder for acrylic plate, AISI 316 stainless steel
20.001	Top glass, ø32 mm, (10 pcs)
20.005	Bottom glass, ø27,5 mm x 0,2 mm (100 pcs)

	Sedgewick Rafter counting cell
21.015	Sedgewick rafter counting cell, 1 ml
	Accessories
21.016	Top glass

	Counting chamber for ZOO plankton
21.050	Counting chamber for ZOO plankton
21.051	Glass plate for counting chamber

	Formalin wash out system
21.100	Formalin wash out system with 6 conical containers, capacity 2 litres each
n/a	Botom plate
n/a	Top plate with net, 500 µ
n/a	Packing
n/a	Threaded ring

	Filtration aggregate
22.009	Filtration aggregate for ø47 mm paper, AISI 316 stainless steel.
22.010	Filtration aggregate, in-situ work
	Accessories
22.011	Filtration insert, 10 to 140 µ
22.012	Ring detacher for filtration unit
22.013	Fixation rack for filtration aggregate

	Pore water presing unit
22.200	Pore-water pressing unit, 5 pcs pressing houses, 100 cm³
22.210	Pore-water pressing unit, 3 pcs pressing houses, 100 cm³
	Accessories
22.105	4 ports compressed air-manifold for using several pore water systems
22.110	Top part (black POM)
22.115	Bottom part (black POM)
22.120	Cylinder, 25 ml, black POM
22.125	Cylinder, 100 ml, black POM
22.130	Sealing O-ring, 42,52 x 2,62 mm NBR 70, 2 pcs
22.135	Thin film of latex distribution, 10 pcs
22.140	Accepted paper filter dimension, O.D. 47 mm, Millipore or Whatman
22.145	Support screen: O.D. 40 mm Sartorius no. 6980232
22.150	Pore-water outlet, O.D. 1 mm PTFE hose or luer-fittings

	Plankton net
	Small plankton net, ø250 mm (0,05 m²)
23.000	Small plankton net, ø250 mm, net bag 400 mm, from 20 to 200 µ, please specify by order
23.002	Small plankton net, ø250 mm, net bag 400 mm, from 5 to 15 µ, please specify by order
	Spare parts
23.001	Sample cylinder with valve
	Accessories
23.003	Protection carrying bag for small plankton net, made of nylon

	Small plankton net, ø400 mm (0,125 m²)
23.010	Plankton net, ø400 mm x 100 cm, from 50 to 500 ², please specify by order
23.011	Plankton net, ø400 mm x 100 cm, from 50 to 500 ², please specify by order, with ø170 mm cone opening
	Spare parts
23.001	Sample cylinder with valve

	WP-2 plankton net, ø570 mm (0,25 cm²)
23.100	WP-2 plankton net, consists of B + C + D + E + F + G + H. (A + I is not included)
	Accessories
23.050	"Nansen# 1 step releaser mechanism, heavy-duty model, incl. drop messenger 800 g
23.060	Complete set of lead weights for WP-2 net (including rack) 25 kg (11 pcs)
23.091	Digital flow meter, with back-run stop
	Spare parts
23.070	Drop messenger for "Nansen" releaser, 800 g
23.150	WP-2 net (net part only) nylon cord closing rope included
23.200	Netbucket (complete) for WP-2 net

	Bongo net, ø600 mm (2 x 0,28 m²)
23.300	Bongo net (without depth depressor and wire)
	Accessories
23.310	V-fin depressor, 18 kg
23.091	Digital flow meter with back-run stop
	Spare parts
23.315	Wire, ø8 mm stainless steelwith shackle
23.325	Fixture, AISI 316 stainless steel, each
23.330	Net part Monodur Nytal, from 100 to 500 µ, please specify by order
23.335	Fixture, AISI 316 stainless steel, each
23.340	Bar with 2 rings clamping fixture, stainless steel, each
23.345	Net bucket for ring trawl, Bongo andHensen net, each

	Ring trawl net, ø1000 mm (0,785 m²)
23.400	Ring trawl net, complete
	Spare parts
23.401	Rope with bridle and snap hook
23.402	Net ring of AISI 316 stainless steel
23.403	Clamping fixture, AISI 316 stainless steel
23.404	Cylindrical and conical net part
23.405	Clamping fixture, AISI 316 stainless steel
23.090	Digital flow meter
23.091	Digital flow meter, with back-run stop
23.345	Net bucket for ring trawl, Bongo and Hensen net

	Plankton pump
23.570	Plankton pump, 1 x 230 Volt AC, AISI 304 stainless steel
	Accessories
23.091	Digital flow meter with back-run stop
	Spare parts
23.571	Net bag, 60 µ
23.572	Polycarbonate collecting bottle, 1 litre
23.573	Cathode protection consisting of 9 pcs zink items

	Small water samplers with telescope handle
24.000	Water sampler for wells and pools, 250 ml
24.001	Water sampler for wells and pools, 750 ml
	Spare parts
24.100	Acrylic beaker, 250 ml

	Digital flow meter
23.090	Digital flow meter without back-run stop. Counter: 5 digits. Diameter of propeller: 75 mm
23.091	Digital flow meter with back-run stop. Counter: 5 digits. Diameter of propeller: 75 mm

	Sorting tray
25.000	Sorting tray, 15 rooms

	Sieves
	Rectangular
26.100	Sieve in AISI 316 stainless steel, 20 x 40 x 7 cm, 500 µ
26.125	Sieve in AISI 316 stainless steel, 20 x 40 x 7 cm, 1000 µ
26.150	Sieve in AISI 316 stainless steel, 20 x 40 x 7 cm, 1500 µ
26.175	Sieve in AISI 316 stainless steel, 20 x 40 x 7 cm, 2000 µ

	FST-Hemispheres
27.000	Complete set of FST Hemispheres with container, base plate with spirit level and support for FST Hemispheres
n/a	set of hemispheres consisting of 21 pcs calibrated Hemispheres
n/a	1 base plate with spirit level
n/a	1 container with support for FST Hemispheres
n/a	1 FST Hemisphere spare part, #1 to #21

	Sediment trap
28.050	Sediment trap station, ø80/74 mm (1 trap)
28.100	Sediment trap station, ø80/74 mm (2 traps)
28.150	Sediment trap station, ø80/74 mm (3 traps)
28.200	Sediment trap station, ø80/74 mm (4 traps)
	Spare parts
28.101	Sample tube
28.102	Zinc anode, ø50 x 10 mm

	Current meter rack
29.000	Current meter rack

	Winches for small boats
	Hand operated
30.000	Winch in AISI 316 stainless steel with mechanical meter counter and 50 meter wire (excluding boat fittings)
30.001	Mounting of slip-ring device on winch, excluding slip-ring device. Available slip-ring devices.

30.070	Winch in AISI 316 stainless steel (small model) prepared for slip-ring device (2/4/6 or 8 poles), excluding boat fittings and wire.
30.371	Mounting of slip-ring device on winch, excluding slip-ring device. Available slip-ring devices.

30.250	Winch in AISI 316 stainless steel, prepared for slip-ring device (2/4/6 or 8 poles), excluding boat fittings and wire.
30.251	Mounting of slip-ring device on winch, excluding slip-ring device. Available slip-ring devices.

	Winch for small boats
	Operated by electrical motor
30.100	Winch in AISI 316 stainless steel, 24 Volt DC/750 W excluding free handle brake, boat fittings, wire, winch arm, slip-ring device and meter counter
30.100A	Mounting of 1 pc winch arm, 100 cm long, incluiding winch arm
30.100B	Mounting of slip-ring device on winch, excludinmg slip-ring device. Available slip-ring devices.
30.100C	Mounting of digital meter wheel system on winch, excluding meter wheel. Available meter wheels.
30.100D	Mounting of free handle brake, including free handle brake
30.100E	Electronic variable speed regulation, 24 Volt DC

30.200	Winch in AISI 316 stainless steel, 24 Volt DC/370 W, relay-box, remote control, de-clutch aggregate and prepared for slip-ring device, excluding boat fittings and wire
30.210	Mounting of slip-ring device on winch, excluding slip-ring device. Available slip-ring devices.

	CTD deck winch - 24 Volt DC/750 W
32.200	CTD deck winch in AISI 316 stainless steel, 24 Volt DC/750 W excluding slip-ring device, cable guide system and cable. Available slip-ring devices.
32.200A	Mounting of slip-ring device on winch, excluding slip-ring device. Available slip-ring devices.
32.200B	Automatic cable guide system mounted on the winch.
32.200C	Electronic meter couunter with a large display and ø200 mm wheel (200 kg) with flexible hinge and 2 pcs electronic sensors.
32.200D	Electronic variable speed regulation, 24 Volt DC

	CTD deck winch - 220 Volt AC/2,2 KWatt
32.600	CTD deck winch in AISI 316 stainless steel, 220 Volt AC/2,2 KWatt excluding slip-ring device, cable guide system and cable. Available slip-ring devices.
32.600A	Mounting of slip-ring device on winch, excluding slip-ring device. Available slip-ring devices.
32.600B	Automatic cable guide system mounted on the winch.
32.600C	Electronic meter couunter with a large display and ø200 mm wheel (200 kg) with flexible hinge and 2 pcs electronic sensors.

	CTD deck winch - 3 x 400 Volt AC/7,5 KWatt
40.200	CTD deck winch in AISI 316 stainless steel, 3 x 400 Volt AC/7,5 KWatt excluding slip-ring device, cable guide system and cable. Available slip-ring devices.
40.200A	Mounting of slip-ring device on winch, excluding slip-ring device. Available slip-ring devices.

	Winch for boats
	Hydraulic
40.300	CTD deck winch in AISI 316 stainless steel, 25 KWatt, excluding slipring device and cable
40.300A	Mounting of slip-ring device on winch, excluding slip-ring device. Available slip-ring devices.

	Meter wheel
30.351	AISI 316 stainless steel box with a large display, max. 999,9 meters
30.350	Counter meter wheel, (100 kg), 8"/200 mm with flexible hinge and 2 pcs electronic sensors.
30.367	Counter meter wheel, (1000 kg), 11"/300 mm with flexible hinge and 2 pcs electronic sensors
30.364	Counter meter wheel, (2000 kg), 15"/400 mm with flexible hinge and 2 pcs electronic sensors
30.366	Counter meter wheel, (3000 kg), 19"/500 mm with flexible hinge and 2 pcs electronic sensors

	Slip-ring device
30.390	Slip-ring device, 2 pol
30.400	Slip-ring device, 4 pol
30.600	Slip-ring device, 6 pol
30.800	Slip-ring device, 8 pol

	Haps bottom corer, ø140/ø136 mm
50.000	HAPS, frame supported bottom corer, consists of 1 pc main rack. 4 pcs 50.400, 4 pcs 50.200, 4 pcs 50.300, 1 pc 50.500 and 1 pc 50.600
	Spare parts
50.100	Lead weight, 2 kg for Haps, ø150 x 36 x 15 mm
50.200	Lead weight, 5 kg for Haps, ø200 x 100 x 25 mm
50.300	Lead weight, 2 kg for Haps, ø150 x 13 x 15 mm
50.400	Lead weight, 10 kg for Haps, ø540 x 40 x 40 mm
50.500	Non-return flap
	Accessories
50.600	Sample tube, AISI 316 stainless steel. ø140/ø136 mm.
50.700	Sample tube, polycarbonate. ø133/ø127 mm
50.800	Sample ejection aggregate.

	Haps, hand operated, ø140/ø136 mm
50.820	Complete hand operated Haps rack without corer tube
	Accessories
50.600	Sample tube, AISI 316 stainless steel. ø140/ø136 mm.
50.700	Sample tube, polycarbonate. ø133/ø127 mm

	Hand operated Haps, ø100 mm
50.900	Hand operated sediment corer, without corer tube
	Accessories
50.901	Sample tube, AISI 316 stainless steel, O.D./I.D. ø104 x ø100
50.902	Shovel closing arrangement

	Multi corer, 6 x ø100/ø95 mm
70.000	Multi corer, complete with 6 pcs ø100/ø95 mm sample tube. Consists of 1 pc main rack, 6 pcs sample tubes, 1 pc hydraulic damper, 6 pcs 10 kg weights and 2 pcs safety locks
	Accessories
70.001	Lead weight, 10 kg for multi corer
70.002	Sample tube, polycarbonate, ø100 x 600 mm
70.003	Special carriage for transport
70.004	Special net bag mounted on frame for protection against infiltration from main wire
	Spare parts
70.005	Releaser wire with ø5 mm pin, length 1130 mm

	Box corer, 400 cm²
80.400	Box corer, 400 cm², complete, consists of 1 pc main rack, 1 pc 400 cm² sample tube AISI 316 stainless steel, 1 pc inner shovel, 1 pc safety lock and 20 pcs 5 kg lead weights
	Accessories
80.401	Sample tube, 400 cm², AISI 316 stainless steel
80.402	Sample tube, polycarbonate, 400 cm²
80.403	Small carriage for sample tube transport
80.404	Transport frame mounted on a wood container
80.405	Sample tube, 400 cm², special with removeable front plate
80.406	Hydraulic damper mounted on box rack
80.407	Lead weight, 5 kg
80.408	Inner shovel for 400 cm²
80.409	Safety lock

	Box corer, 600 cm² and 1000 cm²
80.000	Box corer, 600 cm², complete, consists of 1 pc main rack, 1 pc 600 cm² samler tube AISI 316 stainless steel, standard, 1 pc inner shovel and 6 pcs 20 kg lead weights (120 kg) and 1 pc safety lock
	Accessories
80.001	Sample tube, standard 600 cm², AISI 316 stainless steel
80.002	Sample tube, special 600 cm² with removeable front plate
80.003	Inner shovel for 600 cm²
80.004	Small carriage for sample tube transport
80.200	Lead weight, 20 kg

80.100	Box corer, 1000 cm², complete, consists of 1 pc main rack, 1 pc 1000 cm² samler tube AISI 316 stainless steel, standard, 1 pc inner shovel and 6 pcs 20 kg lead weights (120 kg) and 1 pc safety lock
80.101	Sample tube, standard 1000 cm², AISI 316 stainless steel
80.102	Sample tube, special 1000 cm² with removeable front plate
80.103	Inner shovel for 1000 cm²
80.200	Lead weight, 20 kg
80.300	Small carriage for sample tube transport

	Various parts
100.050	KC tripod rack

100.220	Tripod rack, exclusive crossbar and truck
100.221	Tripod rack, inclusive crossbar and truck
100.222	Bonfiglioli W86 worm gear with drum. (Ratio 64:1). Without wire. Capacity 200 metres of AISI 316 wire, 7 x 16.
100.223	Frequency converter built-in, 230 Volt AC/1500 Watt with switches and joy-stick
100.224	Brake resistor for 230 Volt AC mounted in a plastic box
100.225	For an easier transportation, the legs can be detachable in the middle, making an overall length of app 2 metres.

100.060	Winch, 220 Volt AC/750 W
100.070	Control box, frequency regulated

100.195	Lamp, 12 Volt DC/35W mounted in AISI 316 stainless steel house
100.196	Video camera house, ø72 x 120 mm, without subcon connector
100.197	CDC - camera 152570
100.199	Video camera house, ø50 x 120 mm, without subcon connector

100.200	Flux chamber made of acrylic, 300 x 300 x 480 mm

	Small Multiple water sampler (50 ml syringe)
100.210	Small multiple water sampler with 12 pcs 50 ml nylon syringes. The sampler is made of AISI 316 stainless steel
	Accessories
100.214	Time lapsed trigger for multiple water sampler 100.210 - 100.213
100.215	Battery box, 12 Volt DC/5,2 Amp/h, AISI 316 stainless steel, for multiple water sampler. Max. depth 6000 m.
100.216	Battery box, 24 Volt DC/2,6 Amp/h, AISI 316 stainless steel, for multiple water sampler. Max. depth 6000 m.

	Battery boxes
100.201	Battery box, 24 Volt DC/10 Amp/h, AISI 316 stainless steel, Max. depth 150 m.
100.202	Battery box, 12 Volt DC/20 Amp/h, AISI 316 stainless steel, Max. depth 150 m.
100.208	Battery box, 24 Volt DC/15 Amp/h, AISI 316 stainless steel, Max. depth 150 m.
100.209	Battery box, 12 Volt DC/30 Amp/h, AISI 316 stainless steel, Max. depth 150 m.

	Data logger boxes
100.198	Data logger with 2 pcs 10 pin subcon connectors

	Hydroscope
200.100	KC Hydroscope, AISI 316 stainless steel
200.101	Hydroscope, PE-HD plastic

	Haakanson cone apparatus
n/a	Haakanson cone apparatus



200.319	New net bag mounted on customer supplied small triangular fishing net frame

	Measuring tray
200.312	Measuring tray 30 cm, with reservoir and ruler all made of AISI 316 stainless steel
200.313	Measuring tray 30 cm, with ruler all made of AISI 316 stainless steel. H x B x D: 45 x 300 x 150 mm, weight 0,8 kg.
200.314	Measuring tray 50 cm, with ruler all made of AISI 316 stainless steel. H x B x D: 45 x 500 x 150 mm, weight 1,35 kg.
200.315	Measuring tray 100 cm, with ruler all made of AISI 316 stainless steel. H x B x D: 45 x 1000 x 150 mm, weight 2,7 kg.


	Sandblasting equipment. 1000 mm
400.040	Large sandblasting cabin with recycling system and wall fittings.. Exclusive exhaust system. (Optional)
400.050	Stand for large cabin, 4 pcs. 3" wheels
400.060	Painting of cabin
400.120	12 Volt DC actuator mounted with control panel
	Spare parts
400.070	ø4 mm sand jet blower made of black PVC
400.080	ø4 mm steel jet for sand jet blower made of steel St-52-3 quality.
400.090	Thin rubber gloves for cabin
400.110	Foot pedal with wire (2m)
400.100	Exhaust system, consists of a 1,5 KW vacuum cleaner, special pipe and micro filter mounted. 1 pc vacuum cleaner bag, 2 quick-acting couplings and 4 metres of ø50 mm vacuum hose. Base frame with 4 wheels.
400.130	Vacuum hose, specify length upon order
400.140	Vacuum cleaner bag

	Sandblasting cabin, 750 mm
400.250	Complete sandblast cabin, 750 mm, cabin made of 3 mm aluminium plate
400.251	Aluminium stand with 4 pcs 3” rubber wheels, 2 of them with brakes.
400.252	Painting of cabin. Your choice.
400.2532	Complete 24 Volt DC actuator system (2 pcs actuators, control box and remote control) for height adjustments mounted on stand and cabin. Maximum increase of height: 20 cm.
400.155	Ø1 mm sand jet blower made of black PVC
400.160	Ø1 mm steel jet for sand jet blower made of steel St-52-3 quality
400.205	2 mm thin slitted neophrene rubber plates for glove manifolds.
400.110	Foot pedal with wire (2 meter)

	Sandblasting cabin, 1500 mm, with recycling of powder
400.200	Complete sandblast cabin, 1500 mm, with powder reservoir for recycling of sandblasting material. Cabin made of 3 mm aluminium plate. A sand jet blower, ø4 mm and foot pedal is included.
400.201	Aluminium stand with 4 pcs 5” rubber wheels, 2 of them with brakes. Dimensions with mobile stand: L x W x H: App. 160 x 65 x 170 cm
400.202	Painting of cabin. Your choice.
400.203	Halogen lamp, 12 Volt DC in a adjustable, dustproof housing. Mounted on a carriage guided by 2 pcs horizontal bars.
400.204	Complete 24 Volt DC actuator system (2 pcs actuators, control box and remote control) for height adjustments mounted on stand and cabin. Maximum increase of height: 20 cm.
400.070	Ø4 mm sand jet blower made of black PVC
400.080	Ø4 mm steel jet for sand jet blower made of steel St-52-3 quality
400.205	2 mm thin slitted rubber plates for adjustable glove manifolds.
400.110	Foot pedal with wire (2 meter)

	Portable sandblasting machine
400.415	Complete portable sandblasting machine including: 5 metres of ø8 mm reinforced air tube. 5 meters of 220 Volt supply cable (3 x 0,75 mm²) 1 pc plastic powder container. 1 pc foot switch. A blasting pistol with ø4mm jet. Total weight: 10 kg
	Spare parts
400.080	ø4 mm steel jet for sandblaster
400.110	Foot switch with cable (2 metres)


	Autonomous vehicles

	Xenon and Beacon equipment

	Water and pore fluid samplers

	Chambers and incubators

	Equipment for Benthic lander

	Steering device

	Microprofilers for the sediment-water interface

	Mini micro profilers

	DET and DGT in situ deployment system

	Actuators and pressure compensated gear motors

	Pressure-stable Bulkhead Penetrator for optical fibres