Multi Water Sampler (Rosette) 

for 6, 12 or 24 pcs 

Niskin PVC Water Sampler

 

Multi water sampler

for 12 bottles

(custom made)

 

Important:

The racks will support standard Niskin water samples as well as KC special models. Capacity of 1,7 - 2,5 - 5,0 and 7,5 litres.

If you intend to use larger bottles please specify by ordering. A rack for 10 litre supports also smaller bottles of any size.

Manual (pdf file, 560 kb), right-click and "save position as"

 

General:

The rack is made from AISI 316 stainless steel and has a capacity of 6, 12 or 24 Niskin water samplers. The release system is motor driven (24 Volt DC) and can be released manually or fully programmable by mounting of an optional time lapsed trigger (60.010).

 

The water sampler tube is made of PVC and the top and bottom lids are made of PVC and the interior is totally free from metal parts.

The top and bottom lids are held together with a rubber tube (RS-40 Latex).

 

 

Models:

The rack is available as three models:

60.000 - capacity: 12 bottles

60.050 - capacity: 6 bottles

60.070 - capacity: 24 bottles

 

Niskin bottles:

The bottles are available in different sizes with a range from 1,7 litre to 10,0 litre.

Other applications:

The Niskin water sampler can also be used as a single unit by mounting of a center hanger (60.002). Requires drop messenger 60.004 - 800 gr. 

 

The Niskin water samplers can also be used in series (cascade) and closes correspondingly. Each water sampler requires a drop messenger. (60.001 - 400 gr.)

 

Low cost Niskin bottles:

To minimize the costs we have developed a special Niskin bottle which will fit only for the rack system. Can be used as a standard sampler by adding components. 
See the chart at the end of the page.

General:

Programmable timer for individual release of a maximum of 99 water samplers.

Click here for more details

 

Multi water sampler with

6 bottles. (Custom made)

Mounting for cascade where each sampler closes correspondingly

The Niskin water sampler used as a single unit by mounting of a center hanger. (60.002). Requires drop messenger 60.004 (800 gr.)

Reversing thermometer assembly

Motor unit for multiple water sampler

On the Niskin water sampler you must pass and secure the wire through the handle. This method will keep the top lid in the correct position, so it will not get hit by the drop messenger during the release.

The latex rubber band for closing the lids has a limited warranty and direct exposure to sunlight for a longer period will shorten durability.

Standard delivery includes

1 pc drop messenger, 400 gr,

2 pcs. M10 mounting clamps

No drop messenger, no M10 clamps

Single sampler, attached to a line, and a weight at the end of the line ensures the vertical position

1 pc drop messenger, 400 gr,

2 pcs M10 clamps

1 pc drop messenger 400 gr,

2 pcs M10 clamps

Cascade, more samplers attached to a line, and a weight at the end of the line ensures the vertical position

1 pc drop messenger, 400 gr/each sampler,

2 pcs M10 mounting clamps/each sampler

1 pc drop messenger, 400 gr/each sampler,

2 pcs M10 mounting clamps/each sampler

With center hanger, attached to a line, without a weight at the end

1 pc drop messenger, 800 gr,

1 pc center hanger

1 pc drop messenger, 800 gr,

1 pc center hanger