- Description:
- On front are mounted 2 complete
glove manifolds, flexible
hoses and in the end is mounted a plastic ring with a 2
mm
slitted neoprene rubber plate. At the bottom of the cabin
is 1 pc
stainless steel tray with 5 x 5 mm holes.
-
- On the right side of the cabin a huge door is
mounted with an air scoop and 2 pcs of small wall ducts.
The door is tightened with a special soft PVC packing. On the sloping front edge a 3 mm
glass plate is mounted in a plastic frame with packing.
-
- Dimensions:
- Dimensions of the cabin
(inside): L x W x H: 750 x 500 x 550 mm.
-
- Mounting of cabin:
- Mounting on a table or wall.
Mobile stand and/or height adjustment is optional.
-
- Mobile stand:
- Optional: The cabin can be
mounted on a mobile stand with 4 pcs 3" rubber
wheels and 2 brakes in the front.
-
- Adjustment of height:
- Can be done via an electric 24 Volt DC
actuator. (Optional). Increase of height: Max.
20 cm.
-
- Built-in light:
- On the exterior at the top are mounted
a box with 2 fluorescent
tubes, 2 x 20 W, (colour code 33) and a switch for the
light. A glass plate with packing is
mounted on the top of the cabin.
-
- Application:
- The cabin can be used for all
types of powder, (Glass-powder, aluminium oxide (corundum),
sand-powder and similar powder)).
-
- Standard delivery:
- Please note, standard
delivery is an unpainted cabin. If you wish you can
decide your own colour of the cabin, ordering no.
400.252. (Optional)
-
-
 |
 |
- Right side of cabin, showing air
- scoop and 2 pcs of small wall ducts.
|
Interior
of the cabin.
|
| 400.155 - ø1 mm
Sand jet blower |
|
| 400.160
- ø1 mm Steel jet for jet sand blower |
|
-
-
-
| Description |
Ordering
no. |
| Complete
sandblast cabin, 750 mm, cabin made of
3 mm aluminium plate. Standard delivery is an unpainted
cabin.
Colour at your choice:
ordering no. 400.252.
Dimensions: L x W x H: 75
x 50 x 55 cm. |
400.250 |
| |
|
| Accessories |
|
- 1 pc stable aluminium
stand with 4 pcs 3” rubber wheels,
2 of them with brakes. Dimensions with mobile
stand:
|
400.251 |
|
Painting of cabin. Colour at
your
choice.
|
400.252 |
- Complete 24 Volt DC actuator
system (1 pc actuator, control box and
remote control) for height adjustments mounted on stand and
cabin. Maximum increase of height: 20 cm.
|
400.253 |
|
|
|
|
Spare parts
|
|
|
2 mm thin slitted neoprene rubber
plates for glove manifolds.
|
400.205 |
|
Foot pedal with wire (2
meter)
|
400.110 |
