- Description:
- On front are mounted 4 complete adjustable
glove manifolds, flexible
hoses and in the end is mounted a plastic ring with a 2
mm slitted neophrene rubber plate. On the sloping front edge a 3 mm
glass plate is mounted in a plastic frame with packing.
-
- On both ends a huge door is
mounted and the right door has an air scoop and 2 pcs of small wall ducts.
The doors are tightened with a special soft PVC packing.
At bottom of the cabin are 3 pcs
stainless steel trays with 5 x 5 mm holes.
- Dimensions:
- The cabin (inside): L x W x H:
150 x 50 x 55 cm
- Cabin with mobile stand: L x W x
H: 160 x 65 x 170 cm
-
- Mounting of cabin:
- The cabin can be placed on a
table or mounted on a mobile stand (Optional). The stand
can also be equipped with actuars for adjusting the
height of the cabin.
-
- Mobile stand:
- The cabin can be
mounted on a mobile stand (Optional) with 4 pcs 5" rubber
wheels and 2 brakes in the front.
-
- Adjustment of height:
- Can be done via
2 electric 24 Volt DC actuator. Increase of height: Max.
20 cm. (Optional).
-
- Built-in light:
- On the exterior at the top are mounted
a box with 2 fluorescent
tubes, 2 x 40 W, (colour code 33) and a switch for the
light. A glass plate with packing is
mounted on the top of the cabin. Dimensions 120 x 20 cm.
-
- Application:
- The cabin can be used for all
types of powder, (Glass-powder, aluminium oxide (corundum),
sand-powder and similar powder)).
- Standard delivery:
- Includes cabin, a
sand jet blower, ø4 mm and a foot pedal. Please note,
standard delivery is an unpainted cabin. If you wish you
can decide your own colour of the cabin, ordering no.
400.202. (Optional).
-
-
-
-
| Description |
Ordering
no. |
| Complete
sandblast cabin, 1500 mm, with powder reservoir for
recycling of sandblasting material. Cabin made of
3 mm unpainted aluminium plate. A
sand jet blower, ø4 mm and foot pedal is
included. Painting of cabin is optional. (400.202)
Dimensions: L x W x D: 150
x 50 x 55 cm. |
400.200 |
| |
|
| Accessories |
|
- 1 pc stable aluminium
stand with 4 pcs 5” rubber wheels,
2 of them with brakes. Dimensions with mobile
stand:
- L x W x H: App. 160 x
65 x 170 cm
|
400.201 |
|
Painting of cabin. Colour at
your
choice.
|
400.202 |
|
Halogen lamp, 12 Volt DC in a
adjustable, dustproof housing. Mounted on a carriage
guided by 2 pcs horizontal bars.
|
400.203 |
- Complete 24 Volt DC actuator
system (2 pcs actuators, control box and
remote control) for height adjustments mounted on stand and
cabin. Maximum increase of height: 20 cm.
|
400.204 |
|
|
|
|
Spare parts
|
|
|
Ø4 mm sand jet blower made
of black PVC
|
400.070 |
|
Ø4 mm steel jet for sand jet
blower made of steel St-52-3 quality
|
400.080 |
|
2 mm thin slitted rubber
plates for adjustable
glove manifolds.
|
400.205 |
|
Foot pedal with wire (2
meter)
|
400.110 |
|
