 |
Model A:
The sample tube (2) is a 50 cm long acrylic tube, screwed
into a POM house (1) with a built-in silicone contra
flap. The shaft (8) is 4 metres (2 x 2 metres), and the tube is made from stainless steel with solid assembly fittings (9),
which results in a lightweight but strong construction.
The sampled sediment core is visible through the
transparent acrylic sample tube.Model B:
The same characteristics as for model A. During
sampling excess the water in the tube is expelled through a
completely open end. An AISI 316 stainless steel mount
inserts a rubber bung during withdrawal of the sediment
sample.
|
| Description |
Ordering No. |
- Complete sediment core sampler
with:
- 1 pc 50 cm acrylic tube and 4 metres
(2 x 2 metres) shaft made of stainless steel.
|
Model A
Model B |
13.000
13.400 |
| (2) 2" tube thread / sharpened |
O.D./I.D. ø60 / 52 mm |
L=50 cm, weight 0,5 kg
L=100 cm, weight 0,9 kg |
13.001
13.011 |
| (3) 2" tube thread / thread |
O.D./I.D. ø60/
52 mm |
L=50 cm, weight 0,5 kg
L=100 cm, weight 0,9 kg |
13.002
13.012 |
| (4) Adjustable piston rod
with silicone packing |
L=65 cm
L=115 cm |
13.003
13.013 |
| (5) Carver,
(nose piece), AISI 316 stainless steel, weight 0,2 kg |
13.004 |
| (6) Rubber bung |
13.005 |
| (7) Fraction tray for
ejected sample, weight 0,4 kg |
13.006 |
| Extension
shaft, stainless steel |
L=2
metres |
13.014
|
|
Do not use alcohol for
cleaning acrylic parts