|
- Slip ring device mounted on winch.
- Shown with Subconn connector
(optional)
KC slip ring device
Transferring of data and power to CTD probes and other equipment is
handled by a slip-ring device. (A unique rotating electrical coonector).
Ideal for transmitting signal and control circuits and can be used for
analogue as well as for digital signals. Very small contact resistance
ensures transmitting of all data and power supply without any loss. All models are
equipped with gold contacts for best performance and reliability.
The house is made of AISI 316 stainless steel and electro polished. Inside the house
is mounted
1 pcs strong
ball bearing. The house is hermetically closed by 2 pcs O-rings and seals.
The slip ring device is mounted on an AISI stainless steel bracket and
fatened with a POM ring.
Outside is mounted a Micro Subconn Connector
MCBH-X Male and inside
the drum is mounted a Subconn Connector MCBH-X Female. As an alternative
it can be equipped with a MCIL -X Female. The figure "-X" indicates
number of pins in the connector.
|
Specifications |
| Circuit resistance |
<60 mohm |
| Insulation resistance
at 500 VDC, 50% RH |
>1000 Mohm |
| Dynamic resistance (noise) |
<15 mohm |
| Current |
Max. 5 A each conductor |
| Voltage |
500 VAC - 750 VDC |
| Speed (bidirectional) |
Max. 1000 rpm. |
| Temperature range |
-30 °C to + 85 °C |
| Cross talk |
<40 db at 2 MHz |
| Enclosure rating, the
slip ring itself |
IP 67 |
| Rotation systm |
Ball bearing supported |
| Slip ring life |
30.000 hours at 50 rpm. Depending
on type and cycle of use. |
|
