KC winch for small boats

Operated by hand

30.250 - Winch for small boats. Shown with accessories. (Optional). The floor stand is for demo purpose only

Application:

The winch can be used on small research vessels and it is suitable for Kajak sediment sampler, small Van Veen and Ekman Grabs, Water samplers and other small equipment.

 

General:

The sheave is mounted in a hinger system and equipped with 2 guiding arms to ensure the wire is always correctly leaded.

The winch arm is made from 40 x 40 mm AISI 316 stainless steel tube with an additional reinforcement.  Finish: Electro polished.

Capacity:

600 m of Ø2 mm wire, or

250 m of Ø3 mm wire, or

40 m of Ø10 mm soft polyurethane cable

Operation load: 30 kg.
Gross weight: 20 kg.

Counter:

The winch can be equipped with an electronic meter counter and the drum is prepared for a slip-ring device. (2-8 poles).

Slip-ring device:

Mounting of AISI 316 stainless steel clamp unit for slip ring device on winch, excluding slip ring device.
Please refer to the slip-ring section

 

Mounting:

As standard the winch is delivered with a disc brake and 1 pc. Ø32 x 900 mm AISI 316 stainless steel  shaft for mounting to the boat. Boat fittings can be made on request.