| General: |
|
CTD Winch, 11
kW, with adjustable speed. All materials:
AISI 316 stainless steel. |
|
| |
|
| Electrical |
|
| Power supply: |
3 x 400 VAC, 50 Hz
Optional:
3 x 500 VAC/60 Hz |
| Speed
regulation: |
Fully variable by a joy
stick. Regulated by a frequency converter, ABB, 11
kW. |
| Manoeuvre box: |
AISI 316 stainless steel, 3
mm and ABS plastic.
Enclosure rating: IP 65 |
| Control box: |
AISI 316 stainless steel, 2
mm.
Enclosure rating: IP 65 |
| Emergency
brakes: |
3 pcs. Located at each end
of winch + the manoeuvre box. |
| Motor |
|
| Main motor |
Bonfiglioli 11 kW, with
electro magnetic brake. 3 x 400 VAC/50 Hz. Rev.:
1440/min |
| Mechanical: |
|
| Material |
AISI 316 stainless steel |
| Main rack: |
Square tube, 100 x 100 x 4
mm.
AISI 316 stainless steel |
| Side plates: |
AISI 316 stainless steel, 8
mm. Reinforced by adding tubes of 60 x 40 x 3 mm.
(AISI 316). |
| Drum and disc
brake: |
AISI 316 stainless steel, 8
mm. |
| Finish |
The drum and the disc brake:
Electro polish. Main rack: Painting RAL 5010 |
| Drum: |
Outer diameter: 740 mm
Inner diameter: 460 mm (standard delivery).. |
| Drum rev: |
0 - 42 rev./min. Adjustable. |
| Drum capacity: |
|
| Wire speed: |
Approx. 1,0 m/sec. |
| Angle gearbox |
Bonfiglioli type A603.
Ratio 34,3:1 |
| Tractive force: |
Inner layer:
460 mm (Empty drum): 2800 Nm |
| Brake system: |
1. Disc brake made of AISI
316 stainless steel, 8 mm
2. Automatic motor brake |
| Ball bearings |
AISI 304 stainless steel
flange ball bearings, 3 pcs ø30 mm. |
| Protection
shield: |
Transparent polycarbonate,
6 mm |
| Weight,
standard, without wire |
1000 kg |
| Dimensions,
overall: |
L x W x H: 180 x 113 x 160
cm |
