| General: |
|
CTD Winch, 30
kW, with adjustable speed. All materials:
AISI304/316 stainless steel. |
|
| |
|
| Electrical |
|
| Power supply: |
3 x 400 VAC/50 Hz
Optional:
3 x 500 VAC/60 Hz |
| Speed: |
Fully variable by a joy
stick. Regulated by a frequency converter, ABB, 30 KWatt. |
| Manoeuvre box: |
AISI 304 stainless steel, 3
mm and ABS plastic.
Enclosure rating: IP 65 |
| Control box: |
AISI 304 stainless steel, 2
mm.
Enclosure rating: IP 65 |
| Emergency
brakes: |
3 pcs. Located at each end
of winch + the manoeuvre box. |
| Motor |
|
| Main motor |
Bonfiglioli 30 kW, with
electro magnetic brake. 3 x 400 VAC/50 Hz. Rev.:
1440/min |
| Gear motor for
cable guiding system |
Bonfiglioli, 24 VDC/200 W.
Rev.: 1500/min. Worm gear, Bonfiglioli VF 49, ratio
18:1 |
| Mechanical: |
|
| Material |
AISI 304 stainless steel |
| Main rack: |
Square tube, 100 x 100 x 4
mm |
| Side plates: |
AISI 304 stainless steel, 8
mm. Reinforced by adding tubes of 60 x 40 x 3 mm.
(AISI 304). |
| Drum and disc
brake: |
AISI 304 stainless steel, 8
mm. |
| Finish |
The drum and the disc brake:
Electro polish.
Main rack: Painting RAL 5010 |
| Drum: |
Outer diameter: 960 mm
Inner diameter: Standard delivery 460 mm., |
| Drum rev: |
0-84 rev./min. Adjustable |
| Drum capacity: |
3000 m of 11,43 mm
conductor cable. |
| Wire speed: |
Approx. Max 2,5/sec. |
| Angle gearbox |
Bonfiglioli type A703 -
5000 Nm
Ratio: 16,7:1
Limit: 3600 Nm/84 rev./min |
| Tractive force: |
Inner layer:
310 mm (Empty drum):
700 mm (Full drum): |
| Brake system: |
1. Disc brake made of AISI
316 stainless steel, 8 mm
2. Automatic motor brake |
| Protection
shield: |
Transparent polycarbonate,
6 mm |
| |
|
| Weight,
standard, without wire |
1000 kg |
| Dimensions,
overall: |
L x W x H: 180 x 113 x 160
cm |
