| Hydraulic winch - 60 KWatt - Custom made | |
|
|
Hydraulic winch At the end you can see the heavy-duty hydraulic motor transferring up to 60 KWatt of power.
|
 |
|
 |
Protection shield A transparent shield covers the wire and drum at front and ensures a good protection.
|
 |
Wire guide system Electronically regulated, can be programmed by a PC. |
| Hydraulic | |
| Power: | 60 KWatt |
| Oil flow: | 125 l/min |
| Hydraulic pressure: | 260 bar |
| Motor: | Poclain Wheel Motor 1310 |
| Tractive force: | Outer layer, (approx ø800 mm) 1200 kg/4800 Nm. The winch is capable of 1800 kg/7200 Nm. |
| Brake: | Hydraulic |
| Electrical: | |
| Power supply: | 230 VAC |
| Speed: | Fully variable |
| Mechanical: | |
| Material: | AISI 304 stainless steel |
| Bottom frame: | Square tube: 100 x 100 x 4 mm, |
| Side plates: | 8 mm, AISI 304 stainless steel |
| Drum: | Inner diameter: 460 mm Outer diameter: 960 mm |
| Drum, rev.: | 0 - 60 rev./min, fully adjustable |
| Drum capacity: | 2000 m of ø11,4 mm conductor cable |
| Wire speed: | Approx. 2,5 m/sec. |
| Dimensions: | Overall: W x L x H: 1300 x 2260 x 1100 mm |
| Weight: | 1000 kg |
| Last rev. of this page: February 16, 2007 |