400.200 - Sandblast Cabin, with recycling of powder, length 150 cm:
Sandblast cabin with powder reservoir for recycling of sandblasting material. Can be used for all types of powder, (Glass-powder, aluminium oxide (corundum), sand-powder and similar powder)). Cabin made of 3 mm aluminium plate. (Almg 3). The back side of the cabin has an extraction (square tube) with a pipe stub.
On front are mounted 4 complete adjustable glove manifolds, flexible hoses and inside a plastic ring with a 2 mm slitted neophrene rubber plate. On the sloping front edge a 3 mm glass plate is mounted in a plastic frame with packing.
Both ends of the cabin has a huge door and the right door has an air scoop and 2 pcs of small wall ducts. The doors are tightened with a special soft PVC packing.
The bottom of the cabin comes with 3 removable stainless steel trays with 5 x 5 mm holes.
On the exterior at the top are mounted a box with 2 fluorescent tubes, 2 x 40 W, (colour code 33) and a switch for the light. A glass plate with packing is mounted on the top of the cabin. Dimensions 120 x 20 cm.
Adjustment of height:
Adjustment of height: 20 cm with 2 pcs of 24 Volt DC actuators (optional).
cabin, 1500 mm, with powder reservoir for recycling of sandblasting
material. Cabin made of 3 mm unpainted aluminium plate. A sand jet
blower, Ø4 mm and foot pedal is included. Painting of cabin is
Dimensions: L x W x D: 150 x 50 x 55 cm.
|Painting of cabin. Colour at your choice.||400.202|
|Halogen lamp, 12 Volt DC in a adjustable, dustproof housing. Mounted on a carriage guided by 2 pcs horizontal bars.||400.203|
|Ø4 mm sand jet blower made of black PVC
and stainless steel St-52-3
|Ø4 mm steel jet for sand jet blower made of PVC with brass fittings||400.080|
|2 mm thin slitted rubber plates for adjustable glove manifolds.||400.205|
|Foot pedal with 2 m cable||.110|