Ekman bottom Grab 400 cm2


ekmann_stor.jpg
12.002 - Ekman Bottom corer, 400 cm²:

The Ekman bottom corer is based on the Ekman design. The sediment sampler is made of AISI 316 stainless steel.
To be deployed by means of a steel wire, recommended diameter 5 mm.

For higher performance the grab is configurable with extra lead weights, up to 16 pcs each 5 kg.

The Ekman grab has an automatic release system, once the grab hits the sea bed and the wire slackens, the lock system is deactivated. Retrieving the grab takes the sample.

The sampler comes with a security wire which must be attached to the deployment wire. If the grab gets stuck; i.e. by a stone on the seabed the thin wires located at each side of the top part may break, and you will loose the bottom part of the sampler.


 

Ordering No. 12.000 12.002
Sample volume: 5 L
Sample area: 225 cm² 400 cm² (20 x 20 cm)
Drop messenger, brass: 500 g None (automatic release system)
Height: 45 cm 65 cm. Released position: 105 cm
Weight: 5,6 kg 18,5 kg
Extra weights: None Configurable with a max. of 16 weights, each 2 kg
Spare parts
Drop messenger, brass, Ø3,2 x 9 cm, 500 gr Ordering no. 12.001
Spring for model 12.000 only, requires 2 pcs Ordering no. 12.003

Source: KC Denmark A/S