Available models with Ø80 mm tubes.
28.050: 1 tube, 1 steering fin.
28.075: 2 tubes.
28.100: 2 tubes, 1 steering fin, 1 balance arm.
28.150: 3 tubes, 1 steering fin.
28.200: 4 tubes.
Click here for the : Sediment trap station Ø110/104 mm.
On request, we can provide other sizes of tubes.
The sediment trap has been developed in cooperation with associate professor Michael Olesen, from the Marine Biological Laboratory, University of Copenhagen, Denmark.
28.103 - Main rack:
The main rack for the 28.xxx series sediment sampler, is made from
AISI 316 stainless steel; the rack is delivered with 1 pc 28.102
zinc anode Ø30 x 15 mm 0,55 kg total.
28.101 - Sample tube:
The sample tube 28.101 is used for the KC sediment trap series
28.xxx Ø80 only, the tube is Ø80/Ø72, length 450 mm with a lead
weight in the bottom 1,5 kg total.
28.104 - Arm for sediment station:
The 28.104 arm for the sediment trap station is made from AISI 316
stainless steel and Polyamide PA 6.6, the arm is connected to the
main rack with a pivot joint fastening ring.
28.107 - Balance arm:
Balance arm for the Ø80 mm sediment trap series: This arm can only
be used for the 28.100 model. The arm is made from AISI 316
stainless steel, with a lead weight at the end for creating
balance.
Accessories:
The photos to the right show the various type of minor accessories
that can be bought for spare parts for the sediment system, 28.106
holder for the arm system is made of polyamid PA 6.6, 28.101 Zinc
anode, used for protection against corrosion of the system when
deployed in salt water, 28.108 American wing nut, used for
fastening the sediment tube to the arm, 28.109 Umbraco screw M6 x
12, 5 pcs AISI 316 stainless steel, used for mounting the arms and
fins to the main rack.
Deployment methods:
Seen to the right is the 2 most common options of deployment for
the sediment trap station system, the schematics are for your
general information. KC Denmark A/S cannot estimate any details for
buoys, anchors etc., as local conditions, current and depth range,
etc., are to be considered and tested in practice.
Ø80/Ø72 mm | O.D./I.D. | Length | Weight | Ordering No. |
Sediment trap, 1-tube, inclusive steering fin. Sample: 1,9 L | Ø80/Ø72 mm | 450 mm | 4,5 kg | 28.050 |
Sediment trap, 2-tubes, exclusive steering fin and balance arm. Sample 3,8 L | Ø80/Ø72 mm | 450 mm | 4,8 kg | 28.075 |
Sediment trap, 2-tubes, inclusive steering fin and balance arm. Sample 3,8 L | Ø80/Ø72 mm | 450 mm | 6,6 kg | 28.100 |
Sediment trap, 3-tubes, inclusive steering fin. Sample 5,7 L | Ø80/Ø72 mm | 450 mm | 8,6 kg | 28.150 |
Sediment trap,
4-tubes. Sample 7,6 L |
Ø80/Ø72 mm | 450 mm | 8,8 kg | 28.200 |
Accessories and spare parts | ||||
Sample Tube | Ø80/Ø72 mm | 450 mm | 1,5 kg | 28.101 |
Zinc anode | Ø50 x 10 mm | 28.102 | ||
Main rack | 0,75 kg | 28.103 | ||
Arm with pivot joint and fastening ring for the tube | 0,6 kg | 28.104 | ||
Steering fin for 28.075, 28.100 and 28.150 | 1,9 kg | 28.105 | ||
Holder for sediment tubes, Polyamid PA 6.6 | 28.106 | |||
Balance arm for 28.100 only | 28.107 | |||
American wing nut for fastening the sediment tube | 28.108 | |||
Unbraco screws, M6 x 12, AISI 316 stainless steel, 5 pcs. | 28.109 | |||
Ø110/Ø104 mm | O.D./I.D. | Length | Weight | Ordering No. |
Sediment trap, 1-tube, inclusive steering fin. Sample: 8,5 L | Ø110/Ø104 mm | 700 mm | 6,7 kg | 28.290 |
Sediment trap, 2-tubes, exclusive steering fins. Sample: 17,0 L | Ø110/Ø104 mm | 700 mm | 8,7 kg | 28.295 |
Sediment trap, 2 tubes, inclusive
steering fin and balance arm. Sample: 17 L |
Ø110/Ø104 mm | 700 mm | 12,6 kg | 28.300 |
Sediment trap, 3-tubes, inclusive steering fin. Sample: 25,5 L | Ø110/Ø104 mm | 700 mm | 13,7 kg | 28.350 |
Sediment trap,
4-tubes. Sample: 34,0 L |
Ø110/Ø104 mm | 700 mm | 15,7 kg | 28.400 |
Accessories: | ||||
Sample tube | Ø110/Ø104 mm | 700 mm | 2,1 kg | 28.301 |
Spare Parts: | ||||
Zinc anode | Ø50 x 10 mm | 28.102 |