11.0 KWatt Winch 3 x 400 V AC

40.210 - Winch, 11 kW:

Electrical winch:

11 kW/15 HP.

Power supply:
3 x 400 VAC/50 Hz,
Optional 3 x 500 VAC/60 Hz.

The front is covered by a transparent protection shield (Polycarbonate, 6 mm)

Frequency converter:

The speed of the winch is fully variable due to the frequency converter.

A: Hand brake
B: Slip ring device (optional)
C: Emergency stop. 1 pc at each end
D: 4 brackets for lifting the winch
E: Automatic wire guide
F: Ball bearing for spindle
G: Reinforced edge
H: Solid fastenings brackets (4 pcs).
I: 4 Guiding rolls for wire
J: Drum

Wire guide system:

Mechanical wire guide system.

CTD Winch, 11.0 kW, with adjustable speed. All materials:
AISI 316 stainless steel.
Power supply: 3 x 400 VAC, 50 Hz
3 x 500 VAC/60 Hz
Speed regulation: Fully variable by a joy stick. Regulated by a frequency converter, ABB, 7,5 kW.
Control box: AISI 316 stainless steel, 2 mm.
Enclosure rating: IP 65
Emergency brakes: 3 pcs., located at each end of winch + the control box.
Main motor: Bonfiglioli 11,0 kW, with electro magnetic brake. 3 x 400 VAC/50 Hz. Rev.: 1440/min
Material: AISI 316 stainless steel
Main rack: Square tube, 100 x 100 x 4 mm.
AISI 316 stainless steel
Side plates: AISI 316 stainless steel, 8 mm. Reinforced by adding tubes of
60 x 40 x 3 mm. (AISI 316).
Drum and disc brake: AISI 316 stainless steel, 8 mm.
Finish: The drum and the disc brake: Electro polish.
Main rack: Painting RAL 5010
Drum: Outer diameter: 740 mm
Inner diameter: 460 mm (standard delivery).
Drum rev: 0 - 42 rev./min. Adjustable.
Drum capacity:
Wire speed: Approx. 1,0 m/sec.
Angle gearbox: Bonfiglioli type A603. Ratio 34,3:1
Tractive force: Inner layer:
460 mm (Empty drum): 2800 Nm
Brake system: 1. Disc brake made of AISI 316 stainless steel, 8 mm
2. Automatic motor brake
Ball bearings: AISI 304 stainless steel flange ball bearings, 3 pcs Ø30 mm.
Protection shield: Transparent polycarbonate, 6 mm
Weight, standard, without wire: 1000 kg
Dimensions, overall: L x W x H: 180 x 113 x 160 cm

Source: KC Denmark A/S