30.0 KWatt Winch 3 x 400 V AC

winch_40250-stor.jpg
40.250 - Winch, 30 kW:

Electrical winch

Power:
30,0 kW/40 HP.

Power supply:
3 x 400 VAC/50 Hz,
Optional 3 x 500 VAC/60 Hz.

Drum capacity:
3000 m of Ø11,43 mm conductor cable.

The front is covered by a transparent protection shield (Polycarbonate, 6 mm).

Frequency converter:

The speed of the winch is fully variable due to the frequency converter.

Details:
A: Hand brake
B: Slip ring device (optional)
C: Emergency stop. 1 pc at each end
D: 4 brackets for lifting the winch
E: Automatic wire guide
F: Ball bearing for spindle
G: Reinforced edge
H: Solid fastenings brackets (4 pcs).
I: 4 Guiding rolls for wire
J: Drum

Wire guide system:

Mechanical wire guide system.

General:
CTD Winch, 30,0 kW, with adjustable speed.
All materials:
AISI 316 stainless steel
Electrical
Power supply: 3 x 400 V AC, 50 Hz
Optional:
3 x 500 V AC/60 Hz
Speed regulation: Fully variable by a joy stick. Regulated by a frequency converter, ABB, 30 kW.
Remote control: AISI 316 stainless steel, 3 mm and ABS plastic.
Enclosure rating: IP 65
Control box: AISI 316 stainless steel, 2 mm.
Enclosure rating: IP 65
Emergency brakes: 3 pcs., located at each end of winch + the remote control
Motor:
Main motor: Bonfiglioli 30.0 kW, with electro magnetic brake. 3 x 400 V AC/50 Hz. Rev.: 1440/min
Mechanical:
Material: AISI 316 stainless steel
Main rack: Square tube, 100 x 100 x 4 mm.
AISI 316 stainless steel
Side plates: AISI 316 stainless steel, 8 mm. Reinforced by adding tubes of
60 x 40 x 3 mm. (AISI 304).
Drum and disc brake: AISI 316 stainless steel, 8 mm.
Finish: The drum and the disc brake: Electro polish.
Main rack: Painting RAL 5010
Drum: Outer diameter: 960 mm
Inner diameter: 460 mm (standard delivery).
Drum rev: 0 - 84 rev./min. Adjustable.
Drum capacity: 3000 m of 11,43 mm conductor wire
Wire speed: Approx. 2,5 m/sec.
Angle gearbox: Bonfiglioli type A703. 5000 Nm - Ratio 16,7:1
Limit: 3600 Nm/84 rev./min
Tractive force: Inner layer:
310 mm (Empty drum)
700 mm (full drum)
Brake system: 1. Disc brake made of AISI 316 stainless steel, 8 mm
2. Automatic DC motor brake
Ball bearings: AISI 304 stainless steel flange ball bearings, 3 pcs Ø30 mm.
Protection shield: Transparent polycarbonate, 6 mm
Weight, standard, without wire: 1000 kg
Dimensions, overall: L x W x H: 180 x 113 x 160 cm

Source: KC Denmark A/S