7.5 KWatt Winch 3 x 400 V AC
40.200 - Winch, 7,5 kW:
Electrical winch:
Power:
7,5 kW/10 HP
Power supply:
3 x 400 V AC/50 Hz,
Optional 3 x 500 V AC/60 Hz.
The front is covered by a transparent protection shield (Polycarbonate, 6 mm)
Frequency converter:
The speed of the winch is fully variable due to the frequency converter.
- Details:
- A: Hand brake
- B: Slip ring device (optional)
- C: Emergency stop. 1 pc at each end
- D: 4 brackets for lifting the winch
- E: Automatic wire guide
- F: Ball bearing for spindle
- G: Reinforced edge
- H: Solid fastenings brackets (4 pcs).
- I: 4 Guiding rolls for wire
- J: Drum
Wire guide system:
Mechanical wire guide system.
| General: | |
| CTD Winch, 7,5 kW, with
adjustable speed. All materials: |
AISI 316 stainless steel. |
| Electrical | |
| Power supply: | 3 x 400 V AC, 50 Hz Optional: 3 x 500 V AC/60 Hz |
| Speed regulation: | Fully variable by a joy stick. Regulated by a frequency converter, ABB, 7,5 kW. |
| Control box: | AISI 316 stainless steel, 2 mm. Enclosure rating: IP 65 |
| Emergency brakes: | 3 pcs. located at each end of winch + the control box. |
| Motor | |
| Main motor: | Bonfiglioli 7,5 kW, with electro magnetic brake. 3 x 400 V AC/50 Hz. Rev.: 1440/min |
| Mechanical: | |
| Material: | AISI 316 stainless steel |
| Main rack: | Square tube, 100 x 100 x 4 mm. AISI 316 stainless steel |
| Side plates: | AISI 316 stainless steel, 8 mm. Reinforced by adding tubes of 60 x 40 x 3 mm. (AISI 304). |
| Drum and disc brake: | AISI 316 stainless steel, 8 mm. |
| Finish: | The drum and the disc brake: Electro
polish. Main rack: Painting RAL 5010 |
| Drum: | Outer diameter: 740 mm Inner diameter: 460 mm (standard delivery). |
| Drum rev: | 0 - 43 rev./min. Adjustable. |
| Drum capacity: | |
| Wire speed: | Approx. 1,0 m/sec. |
| Angle gearbox: | Bonfiglioli type A503. Ratio 18:1 |
| Tractive force: | Inner layer: 460 mm (Empty drum): 1500 Nm |
| Brake system: | 1. Disc brake made of AISI 316 stainless steel, 8 mm 2. Automatic motor brake |
| Ball bearings: | AISI 304 stainless steel flange ball bearings, 3 pcs Ø30 mm. |
| Protection shield: | Transparent polycarbonate, 6 mm |
| Weight, standard, without wire: | 600 kg |
| Dimensions, overall: | L x W x H: 180 x 113 x 160 cm |
Source: KC Denmark A/S