New products
Autonomus Benthic Lander
Camera and light
Current Meter Measurement
Dredges
Manta net
Micro Plastic Particle Pump
Mini micro profilers
Plankton Nets
Plankton Pumps
Pressure stable battery cylinder
Rosette and Racks
Sediment Samplers
Sediment Trap Station
Small Multi Water Sampler
Vacuum Filtration Station
Water Sampler
Winches
Other Products
Manual
Offers
In-situ photos

Sandblast cabin, no recycling

400.210 - Sandblast cabin, no recycling of powder.
400.210 - Sandblast Cabin, no recycling of powder, length 150 cm:

Application:
Sandblast cabin without powder reservoir for recycling of sandblasting material. Can be used for all types of powder, (glass-powder, aluminium oxide (corundum), sand-powder and similar powder)). Cabin made of 3 mm aluminium plate. (Almg 3). The back side of the cabin has an extraction (square tube) with a pipe stub.

Description:
On front are mounted 4 complete adjustable glove manifolds, flexible hoses and inside a plastic ring with a 2 mm slitted neophrene rubber plate. On the sloping front edge a 3 mm glass plate is mounted in a plastic frame with packing.

Both ends of the cabin has a huge door and the right door has an air scoop and 2 pcs of small wall ducts. The doors are tightened with a special soft PVC packing.

The bottom of the cabin comes with 3 removable stainless steel trays with 5 x 5 mm holes.

Built-in light:
On the exterior at the top are mounted a box with 2 fluorescent tubes, 2 x 40 W, (colour code 33) and a switch for the light. A glass plate with packing is mounted on the top of the cabin. Dimensions 120 x 20 cm.

Adjustment of height:
Adjustment of height: 20 cm with 2 pcs of 24 Volt DC actuators (optional).

Dimensions:
The cabin (inside): L x W x H: 150 x 50 x 55 cm.
Cabin with mobile stand: L x W x H: App. 160 x 65 x 170 cm.
 
 
400.210 - Sandblast cabin, no recycling of powder, length 150 cm.
 
 
Built-in light illuminates the entire work area.
 
 
A dust filter at end of the cabin.
 
 
400.270 - Noise reduction, support for an exhaust system.
 
 
400.070 - Sandjet blower, nozzle Ø4 mm.
 
 
400.080 - Sandjet blower, Tungsten nozzle Ø1,8 mm.