New products
Autonomus Benthic Lander
Ballast Water Analyzer
Camera and light
Current Meter Measurement
Dredges
Manta net
Micro Plastic Particle Pump
Plankton Nets
Plankton Pumps
Pressure stable battery cylinder
Rosette and Racks
Sediment Samplers
Sediment Trap Station
Small Multi Water Sampler
Vacuum Filtration Station
Water Sampler
Winches
Other Products
Manual
Offers
In-situ photos

Sandblast Cabins 750 mm

sandblast_cabin_750_stor.jpg
400.250 - Sandblast Cabin, length 75 cm:

Application:
The cabin can be used for all types of powder, (glass-powder, aluminium oxide (corundum), sand-powder and similar powder)).
General:
Sandblast cabin, 750 mm, made of 3 mm aluminium plate (Almg 3). Inside the cabin is mounted an exhaustion (Ø63 mm) with a pipe stub.
Description:
On front are mounted 2 complete glove manifolds, flexible hoses and in the end is mounted a plastic ring with a 2 mm slitted neoprene rubber plate. At the bottom of the cabin is 1 pc stainless steel tray with 5 x 5 mm holes.

On the right side of the cabin a huge door is mounted with an air scoop and 2 pcs of small wall ducts. The door is tightened with a special soft PVC packing. On the sloping front edge, a 3 mm glass plate is mounted in a plastic frame with packing.
Dimensions and weight:
Dimensions of the cabin (inside): L x W x H: 75 x 50 x 55 cm.
Dimensions (outer): 89 x 57 x 67 cm
Weight: 29 kg
Mounting of cabin:
Mounting on a table or wall. Mobile stand and/or height adjustment is optional.
Mobile stand:
Optional: The cabin can be mounted on a mobile stand with 4 pcs 3" rubber wheels and 2 brakes in the front.
Adjustment of height:
Can be done via an electric 24 Volt DC actuator, (optional). Increase of height: Max. 20 cm.
Built-in light:
On the exterior at the top are mounted a box with 2 fluorescent tubes, 2 x 20 W, (colour code 33) and a switch for the light. A glass plate with packing is mounted on the top of the cabin.
Application:
The cabin can be used for all types of powder, (glass-powder, aluminium oxide (corundum), sand-powder and similar powder)).
Standard delivery:
Please note, standard delivery is an unpainted cabin. If you wish you can decide your own colour of the cabin, ordering no. 400.252 (optional).
 
 
400.250 - Sandblast cabin, length 75 cm. No recycling of powder.
 
 
400.250 - Sandblast cabin, right side.
 
 
Built-in light illuminates the entire work area.
 
 
400.070 - Sandjet blower, nozzle Ø4 mm.
 
 
400.080 - Sandjet blower, Tungsten nozzle Ø1 mm.
 
 
400.270 - Noise reduction, support for an exhaust system.
 
Description Ordering no.
Complete sandblast cabin, 750 mm, cabin made of 3 mm aluminium plate. Standard delivery is an unpainted cabin. Colour at your choice: ordering no. 400.252.

Dimensions:
(Inner): L x W x H: 75 x 50 x 55 cm
(Outer): L x W x H: 89 x 57 x 67 cm

400.250
Accessories
1 pc stable aluminium stand with 4 pcs 3" rubber wheels, 2 of them with brakes. Dimensions with mobile stand:
400.251
Painting of cabin. Colour at your choice. 400.252
Complete 24 V DC actuator system (1 pc actuator, control box and remote control) for height adjustments mounted on stand and cabin. Maximum increase of height: 20 cm.
400.253
Spare parts
2 mm thin slitted neoprene rubber plates for glove manifolds. 400.205
Foot pedal with wire (2 m) 400.110