New products
Autonomus Benthic Lander
Ballast Water Analyzer
Camera and light
Current Meter Measurement
Dredges
Manta net
Micro Plastic Particle Pump
Plankton Nets
Plankton Pumps
Pressure stable battery cylinder
Rosette and Racks
Sediment Samplers
Sediment Trap Station
Small Multi Water Sampler
Vacuum Filtration Station
Water Sampler
Other Products
Museum Equipment
In-situ photos

30.0 KWatt Winch 3 x 400 V AC

winch_40250-stor.jpg
40.250 - Winch, 30 kW:

Electrical winch

Power:
30,0 kW/40 HP.

Power supply:
3 x 400 VAC/50 Hz,
Optional 3 x 500 VAC/60 Hz.

Drum capacity:
3000 m of Ø11,43 mm conductor cable.

The front is covered by a transparent protection shield (Polycarbonate, 6 mm).

 

Frequency converter:

The speed of the winch is fully variable due to the frequency converter.

 
 
Frequency converter:
 
Details:
A: Hand brake
B: Slip ring device (optional)
C: Emergency stop. 1 pc at each end
D: 4 brackets for lifting the winch
E: Automatic wire guide
F: Ball bearing for spindle
G: Reinforced edge
H: Solid fastenings brackets (4 pcs).
I: 4 Guiding rolls for wire
J: Drum
 
 
Details:
 

Wire guide system:

Mechanical wire guide system.

 
 
Wire guide system
 
General:
CTD Winch, 30,0 kW, with adjustable speed.
All materials:
AISI 316 stainless steel
Electrical
Power supply: 3 x 400 V AC, 50 Hz
Optional:
3 x 500 V AC/60 Hz
Speed regulation: Fully variable by a joy stick. Regulated by a frequency converter, ABB, 30 kW.
Remote control: AISI 316 stainless steel, 3 mm and ABS plastic.
Enclosure rating: IP 65
Control box: AISI 316 stainless steel, 2 mm.
Enclosure rating: IP 65
Emergency brakes: 3 pcs., located at each end of winch + the remote control
Motor:
Main motor: Bonfiglioli 30.0 kW, with electro magnetic brake. 3 x 400 V AC/50 Hz. Rev.: 1440/min
Mechanical:
Material: AISI 316 stainless steel
Main rack: Square tube, 100 x 100 x 4 mm.
AISI 316 stainless steel
Side plates: AISI 316 stainless steel, 8 mm. Reinforced by adding tubes of
60 x 40 x 3 mm. (AISI 304).
Drum and disc brake: AISI 316 stainless steel, 8 mm.
Finish: The drum and the disc brake: Electro polish.
Main rack: Painting RAL 5010
Drum: Outer diameter: 960 mm
Inner diameter: 460 mm (standard delivery).
Drum rev: 0 - 84 rev./min. Adjustable.
Drum capacity: 3000 m of 11,43 mm conductor wire
Wire speed: Approx. 2,5 m/sec.
Angle gearbox: Bonfiglioli type A703. 5000 Nm - Ratio 16,7:1
Limit: 3600 Nm/84 rev./min
Tractive force: Inner layer:
310 mm (Empty drum)
700 mm (full drum)
Brake system: 1. Disc brake made of AISI 316 stainless steel, 8 mm
2. Automatic DC motor brake
Ball bearings: AISI 304 stainless steel flange ball bearings, 3 pcs Ø30 mm.
Protection shield: Transparent polycarbonate, 6 mm
Weight, standard, without wire: 1000 kg
Dimensions, overall: L x W x H: 180 x 113 x 160 cm