Mini-Bat Winch
30.040 - Mini bat winch:
- Application:
- The winch can be used on small research vessels and it is
suitable for Kajak sediment sampler, small Van Veen
and Ekman grabs, water samplers and other smaller equipment.
The winch is shown with a counter/wheel (30.361,
optional).
- General:
- The winch is made of AISI 316 stainless steel profile and finish is electro polish. The built-in disc brake will ensure a swift and safe handling.
- Capacity:
- 600 m of Ø2 mm wire or 400 m of Ø3 mm wire.
- Operation load:
Max. 25 kg.
- Gross weight:
- Approx. 21 kg.
- 30.361 - Digital counter (optional):
- The counter system includes a counter and a meter wheel with a
Hall element and 3 magnets for the counting. Max. read-out of 999,9
m with a resolution of 10 cm.
- 30.3XX - Slip ring device:
Transferring of data or power can be done via a slip ring device (2-8 conductors) (optional). Please refer to the slip ring section.
30.005 - Adjustable bracket:
The 30.005 bracket is made for 30.000/30.040 only, if you wish a
custom made design on a bracket for another winch, please contact
us with your requirements.
30.006 - Adjustable bracket:
The 30.006 adjustable bracket fits for the winch 30.000 and
30.040, if you wish a custom made design on a bracket for another
winch, please contact us with your requirements.
The bracket is made of AISI 316 stainless steel, and works as a universal bracket, which is able to fit on most boats due to the flexible design.
30.060 R - Portable rack for 30.000/30.040 winch:
• A stand with Ø34 steel bar and a circular plate, on which the
30.000/30.040 winch can be locked every 45°
• The stand can be disassembled for easier transportation
• AISI 316 stainless steel made of square tubes, 40 x 40 mm
• Stainless steel box for adding sandbags or similar to be used as
counterweight
• L x W x H: 94 x 58 x 121 cm
• Weight: 37,5 kg
Technical Specifications - Winch
30.040 |
|
KC portable winch operated by hand | SWL: 25 kg (max. 250 Nm, first layer) |
Mechanical | |
Material: | All parts are made of AISI 316 stainless steel |
Main rack: | 35 x 35 x 2 mm profiled tube |
Finish: | Electro polish |
Drum: | Inner diameter: Ø200 mm Outer diameter: Ø320 mm Width: 210 mm |
Drum and disc brake: | 4 mm AISI 316 stainless steel |
Mechanical brake: | Ø320 mm disc brake |
Ball bearing: | AISI 316 stainless steel
flange ball bearing, 1 pc Ø25 mm. |
Shaft required for mounting on bulwark: | Ø20 AISI 316 stainless steel |
Weight and dimensions | |
L x W (depth) x H: | 58 x 76 x 95 cm |
Weight: | Approx.: 20 kg |