New products
Autonomus Benthic Lander
Ballast Water Analyzer
Camera and light
Current Meter Measurement
Dredges
Manta net
Micro Plastic Particle Pump
Plankton Nets
Plankton Pumps
Pressure stable battery cylinder
Rosette and Racks
Sediment Trap Station
Small Multi Water Sampler
Vacuum Filtration Station
Water Sampler
Winches
Other Products
Museum Equipment
In-situ photos

Kajak Corer

13.030 - Kajak sediment sampler
13.030 - Kajak corer, operated by hand or by line:

General:
The KC Kajak Sediment Core sampler is based on the Kajak design and can be used as line operated as well as hand operated sampler. With a wide range of accessories the system can be adjusted for various projects.

Models available:
The Kajak comes as a quick-change model, (13.030). This model speeds up the changing of corer tubes, very useful if you need a lot of samples. All parts are made of AISI 316 stainless steel. Model 13.030 can also be equipped with AISI 316 stainless steel corer tubes. An internal PP (polypropylene) liner can be inserted to the stainless steel tube for easy (and cheap) storing of many samples. The stainless steel tube can also hold the orange peel closing system (core catcher), which will prevent the sample from exiting.

Tubes and liners:
Standard delivery includes 1 pc acrylic sample tube. For very hard sea beds you can mount stainless steel tubes and also include internal liners if you need a large number of samples to be stored for later analysis.

Extension for hand operated Kajak:
Working in small depths up to 4 m, you can operate the Kajak by hand. The upper part of the line operated sampler can be exchanged with a pole in order to sample by manual insertion of the tube. The shafts are made of AISI 316 stainless steel tubes, each 2,0 m. They can be assembled to a maximum length of 6 m, recommended use max. 4 m.
 
 
13.030 - Kajak sediment sampler.
 
 
Quick change system for the sample tube.
 
 
Locking system.
 
 
Steel tube with liner, orange peel and carver.
 

Increase of performance:

Adding top lead weights, 13.310 (each 1 kg, max. mounting 12 pcs = 12 kg) will increase penetration of the bottom sediment. For mounting you will need 2 pcs threaded bars 13.007.
 
 
13.310 - Lead weight, 1 kg.
 

Adapter for Ø80 mm tube (optional):

Allows use of Ø80 mm sample tubes in a standard Kajak (for model 13.030 only). All parts are manufactured from AISI 316 stainless steel. Finish: Electro polish.

Acrylic sample tubes, diameter 80/76 mm, are available with length of 50 and 100 cm. For these tubes we do not provide liners or the orange peel system.

 

 
 
13.050 - Adapter for 80 mm sample tubes.
 

IMPORTANT:

The rubber bung must be smeared with a thin layer of silicone grease before use.

When the Kajak is not in use, please tie up the part as shown to prevent the bung from being jammed in the stainless steel top. Otherwise it is very difficult to separate the parts as the bung might expand a little.

 
 
Securing the rubber bung.
 
Description
Ordering No.
1 complete Kajak with quick change sediment core sampler (1) consists of:
1 pc corer body with quick-change for the core tubes
1 pc 13.001 - 50 cm acrylic tube, 2", thread/sharpened, (2)
6 pcs 13.310 - Top lead weights, 1 kg each
Weight: 9,1 kg
Length: 83 cm

This model can also be used with AISI 316 stainless steel corer tubes. See below.

13.030
Standard accessories for Kajak
2" tube, 60/52 mm, acrylic, machined/sharpened, length 50 cm. 13.001
2" tube, 60/52 mm, acrylic, machined/sharpened, length 100 cm. 13.011
2" tube, 60/52 mm, acrylic, machined/thread, length 50 cm. 13.002
2" tube, 60/52 mm, acrylic, machined/thread, length 100 cm. 13.012
Carver, (nose piece) AISI 316 stainless steel, for acrylic tubes only, inner diameter 52 mm. 13.004
Rubber bung for Ø60 mm acrylic tubes. 13.005
Extension shafts, length 4 m (2 + 2 m) AISI 316 stainless steel, O.D 25 mm. Weight 2,7 kg.
13.302
Extension shaft, 2 m, stainless steel, requires shafts 13.302, so total length is 6 m. Not recommended for taking samples from a small boat. Weight 1,3 kg.
13.303
Top lead weight, 1 kg each. Max. mounting: 12 pcs. Additional requirements: 2 pcs 13.007. 13.310
Threaded bar for mounting of additional lead weights. AISI 316 stainless steel. Requirement: 2 pcs. 13.007
Ejecting the sample from acrylic tubes
Piston rod, adjustable, length 65 cm with silicone packing. For acrylic tubes only. 13.003
Piston rod, adjustable, length 115 cm with silicone packing. For acrylic tubes only. 13.013
Fraction tray for ejected sample. For acrylic tubes O.D 60 mm. 13.006
Kajak equipped with stainless steel tubes and liners
For heavy performance the 13.030 Kajak can be equipped with stainless steel tubes and various equipment:

• Stainless steel tube + carver. (Piston rod cannot be used).
• Stainless steel tube + carver + orange peel system. (Prevents the sample from exit). (Piston rod cannot be used).
• Stainless steel tube + carver + orange peel system + liner. The sample will remain in the liner and can be stored for later analysis. Piston rod can be used to eject the sedi-ment from the liners.
2" tube, machined/thread, AISI 316 stainless steel, O.D./I.D. Ø60,3/Ø53 mm. Length 50 cm. Only for Kajak quick change, model 13.030. 13.533
2" tube, thread/thread, AISI 316 stainless steel, O.D./I.D. Ø60,3/Ø53 mm. Length 100 cm. Only for Kajak quick change, model 13.030. 13.534
Orange peel closing system (core catcher) prevents the sample from exiting. Inner diameter: Ø46 mm. Can only be used for 13.533 or 13.534 core tube. To be fastened with 13.525 carver. 13.524
Carver (nose piece) with cutting edge. For stainless steel tubes. Inner diameter: Ø46 mm. 13.525
Plastic liners for stainless steel tubes
PP liner, (Polypropylene). Ø50 x Ø46 x 495 mm. Can only be used for 13.533 core tube. 13.526
PP liner, (Polypropylene). Ø50 x Ø46 x 995 mm. Can only be used for 13.534 core tube. 13.526 A
PMMA acrylic liner, transparent, Ø50/Ø46 x 495 mm. Can only be used for 13.533 core tube. 13.425
PMMA acrylic liner, transparent, Ø50/Ø46 x 995 mm. Can only be used for 13.534 core tube. 13.427
Steering ring for PP and PMMA liners. To centre the liner without mounting the 13.524 orange peel system. To be fastened with 13.525 carver. Inner diameter: Ø46 mm. 13.527
Ejecting the sample from PP and PMMA liners
The internal design of the stainless steel tubes does not allow the adjustable piston rod to be used for ejecting the sample. It is necessary to use PM or PMMA liners inside the steel tube.
Rubber bung for PP and PMMA liners, Ø50,3/Ø46 mm. 13.528
Fraction tray for ejected sample. For Ø50,3/Ø46 mm PP or acrylic liners only. 13.531
Adjustable piston rod with silicone packing, length 65 cm. For PP or acrylic Ø50/Ø46 mm liners only. 13.532
Adjustable piston rod with silicone packing, length 115 cm.
For PP or acrylic Ø50/Ø46 mm liners only.
13.537
Extension for Ø80 mm acrylic tubes
This adapter is designed for Kajak 13.030 only. You can easily mount the Ø80/Ø72 mm acrylic tube to the sampler. Available lengths: 50 or 100 cm.
Manufactured from AISI 316 stainless steel. Finish: Electro polish.
Piston rods and fraction trays as options.
Adapter for Ø80/72 mm acrylic tubes. AISI 316 stainless steel. For Kajak 13.030 only. Exclusive sample tube. Weight 1,2 kg. 13.050
Sample tube, acrylic, machined/sharpened, Ø80/Ø72 mm, length 50 cm. 13.055
Sample tube, acrylic, machined/sharpened, Ø80/Ø72 mm, length 100 cm. 13.056
Rubber bung for Ø80/Ø72 mm acrylic tube. 13.060
Fraction tray for ejected sample. For Ø80/Ø72 mm acrylic tubes. 13.061
Adjustable piston rod with silicone packing, length 65 cm. For Ø80/Ø72 mm acrylic tubes. 13.065
Adjustable piston rod with silicone packing, length 115 cm. For Ø80/Ø72 mm acrylic tubes. 13.066
Hand winches and lines (Recommended line: Ø5 mm).